Alarm Controls SPX3081 TS-14 2.5in Red Mushroom Button

  • MPN: SPX-3081
  • JMAC ID: 200064535
$445.00
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200064535
df_manual_boost:
1.25

The Alarm Controls SPX3081 is a customized TS-14 pneumatic time-delay request-to-exit station featuring a 2-1/2-inch red mushroom push button mounted on a stainless steel single-gang wall plate. Designed for commercial electronic access control systems, it provides an adjustable 2-60-second release interval, one normally open (N/O) contact pair, and one normally closed (N/C) contact pair. The pneumatic timing mechanism requires no external electrical power and supports controlled door release through compatible electric locks, access control panels, and door release circuits.

Alarm Controls SPX3081 TS-14 Pneumatic Time Delay Exit Button with 2-1/2-Inch Red Mushroom Push Button

The Alarm Controls SPX3081 Pneumatic Time Delay Request-to-Exit Station provides timed door release control for commercial electronic access control installations. Manufactured by Alarm Controls, an ASSA ABLOY brand, the SPX3081 is a customized TS-14 configuration featuring a 2-1/2-inch (63.5 mm) red mushroom push button in place of the standard 1-1/2-inch green button. The oversized actuator provides a prominent manual activation point for controlled-access doors in commercial offices, healthcare facilities, educational buildings, warehouses, and institutional environments. Its stainless steel single-gang wall plate is designed for conventional electrical box mounting and provides a durable installation surface. The station is intended to work with compatible electromagnetic locks, electric strikes, access control controllers, and door release interfaces that accept dry-contact switching signals. The integrated pneumatic timer allows the door release circuit to remain activated for a selected interval without requiring a separate electronic timing module.

The SPX3081 uses a pneumatic time-delay switching mechanism with an adjustable operating interval of 2-60 seconds. When the red mushroom button is depressed, the switch changes the state of its electrical contacts and maintains the selected condition during the pneumatic timing cycle. After the preset interval expires, the contacts return to their normal state, allowing the connected access control equipment to restore the locking condition according to its configuration. The mechanism provides one normally open contact pair and one normally closed contact pair, supporting door release circuits requiring either contact closure or contact interruption. Unlike electronic timers, the pneumatic mechanism operates without an external power supply, although connected locking devices and access control equipment retain their own electrical requirements. The TS-14 family specifies timing repeatability within 10%, allowing installers to establish a consistent release interval for the intended door operation. Contact loading must remain within the rating approved for the supplied switch assembly.

The Alarm Controls SPX3081 combines a 2-1/2-inch red mushroom actuator with the TS-14 family's single-gang stainless steel mounting configuration. The manufacturer specifies a 2-1/4-inch (57.2 mm) mounting depth behind the wall plate for the standard TS-14 pneumatic mechanism, requiring sufficient clearance within the electrical box or mounting enclosure. Electrical connections use 10-inch color-coded wire leads, with red conductors designated for normally closed contacts and blue conductors designated for normally open contacts in the manufacturer's installation documentation. The pneumatic assembly is designed for vertical mounting, with an accessible adjustment knob for setting the release duration. Turning the knob clockwise increases the delay toward 60 seconds, while counterclockwise adjustment reduces it toward 2 seconds. The TS-14 family is specified for operating temperatures from 15 F to 120 F (-9 C to 49 C), making it suitable for compatible indoor door control installations. Installers should verify electrical box depth, contact ratings, and the custom actuator configuration before installation.

The Alarm Controls SPX3081 Request-to-Exit Push Button supports timed access control applications where a manual push button must initiate a temporary release of electrically controlled locking hardware. Its dual-contact switching arrangement and adjustable pneumatic timer allow integration with compatible fail-safe electromagnetic lock circuits, electric strike release inputs, and access control equipment. The standard Alarm Controls TS-14 product family is UL 294 listed, although the certification status of the customized SPX3081 configuration should be verified against its specific manufacturer documentation. The SPX3081 differs from the standard TS-14 with a 1-1/2-inch green button and the TS-14R with a 1-1/2-inch red button by providing an oversized 2-1/2-inch red actuator. The pneumatic timing function eliminates the need for separate timer power while providing controlled switching for the selected interval. The SPX3081 is not a standalone locking device and does not independently control door security without compatible external equipment. Installation must follow Alarm Controls wiring instructions, applicable electrical codes, and emergency egress requirements, including the release provisions required for electronically locked doors.



UPC: 604840030816
Also known as: AC-SPX3081, HES-SPX3081, SPX3081



For more information about the Alarm Controls SPX-3081, please contact us.

2 Reviews

  • 5
    ALARM-CONTROLS-SPX3081

    Posted by 171609 on Jun 13th 2021

  • 5
    ALARM-CONTROLS-SPX3081

    Posted by 95973 on Mar 14th 2016

Live Chat