Alarm Controls RT-1T Additional Transmitter For RT-1 Kit With Key Chain And Holder

  • MPN: RT-1T
  • JMAC ID: 200219080
$24.75
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200219080
df_manual_boost:
2.20
Please Note: In order to keep our prices low, we have a minimum order requirement of $99

The Alarm Controls RT-1T is a 433.92 MHz wireless remote transmitter with a keychain and mounting holder, designed as an additional transmitter for the Alarm Controls RT-1 receiver system. Featuring rolling-code technology with more than one billion code combinations, it provides remote activation of compatible electric strikes, electromagnetic locks, gate operators, and automatic door operators through the paired receiver. The compact transmitter can be carried on a keyring or mounted beneath a desk or on a wall. Compatible RT-1 receivers support up to 30 transmitters, a maximum advertised wireless range of 300 feet, and selectable momentary or latching relay operation. The RT-1T is supplied as an accessory transmitter; the receiver is sold separately.

Alarm Controls RT-1T Wireless Remote Transmitter with Keychain and Holder, 433.92 MHz

The Alarm Controls RT-1T Wireless Remote Transmitter provides convenient remote activation of electronic access control equipment through a compatible Alarm Controls RT-1 wireless receiver. Manufactured by Alarm Controls, an ASSA ABLOY brand, this compact transmitter operates at 433.92 MHz and is designed for applications where a hardwired access control pushbutton is difficult or inconvenient to install. The transmitter can be carried on a keychain or positioned in its supplied holder beneath a desk or on a wall. Typical applications include reception counters, security workstations, commercial entrances, controlled gates, and automatic door installations. When paired with the RT-1 receiver, the RT-1T allows authorized personnel to initiate a wireless control signal without installing a dedicated switching cable between the operating location and the door hardware.

The RT-1T uses rolling-code wireless transmission with more than one billion possible code combinations, providing changing transmitted codes rather than repeating a fixed activation code. Its 433.92 MHz operating frequency supports wireless communication with compatible RT-1 receivers, with a manufacturer-advertised maximum operating distance of 300 feet (91 m) under favorable installation conditions. Actual range depends on building construction, receiver placement, metal obstructions, and radio-frequency interference. Each RT-1 receiver can enroll up to 30 compatible transmitters, allowing multiple authorized employees or operators to control the same entrance. The transmitter sends a wireless activation command to the receiver, which operates its connected relay according to the selected configuration. The RT-1T does not include its own lock-control relay or directly supply electrical power to a connected locking device.

When paired with an Alarm Controls RT-1 receiver, the RT-1T can initiate electrical release of compatible magnetic locks, electric strikes, gate operators, automatic door operators, and other access control equipment. The receiver operates on 12 or 24 VAC/VDC and includes an SPDT Form C relay rated at 1A at 30 VDC or 120 VAC. Its factory-configured momentary mode provides a five-second relay output, while an optional latching mode maintains the relay's activated state until another transmitter command is received. These operating characteristics belong to the paired receiver rather than the battery-powered RT-1T transmitter. The receiver also incorporates a bi-color status LED and a 12-inch antenna. Installers must verify that the connected locking hardware, external power supply, and access control wiring are compatible with the receiver's relay ratings and selected operating mode.

The Alarm Controls RT-1T is supplied as an additional wireless transmitter with a keychain and mounting holder, allowing integration into an existing RT-1 installation without purchasing another complete receiver kit. To enroll the transmitter, the installer activates the receiver's learning function and presses the RT-1T activation button twice, allowing the receiver to register the new transmitter. The manufacturer's RT Series documentation identifies an operating temperature range of -4 F to 140 F (-20 C to 60 C) for the receiver system and documents CE certification and RoHS compliance. The RT-1 package includes one receiver and two transmitters, while the RT-1TW provides an additional transmitter with wire leads for specialized applications. The RT-1T is intended for compatible wireless access control operation and does not independently authorize users, monitor door position, or control emergency egress. Installation and commissioning should follow Alarm Controls' pairing instructions, receiver wiring requirements, and applicable door safety regulations.



UPC: 604840845151
Also known as: AC-RT1T, HES-RT1T, RT1T

Technical Specifications:
  • WORKING FREQUENCY IS 433.92 MHz, WITH A ROLLING CODE WITH ONE BILLION COMBINATIONS
  • SPDT RELAY WITH 1 AMPERE @ 30 VDC OR 120 VAC CONTACTS


For more information about the Alarm Controls RT-1T, please contact us.
  • A UNIQUE TRANSMITTER HOLDER CAN BE MOUNTED UNDER A DESK OR ON THE WALL
  • ONE TRANSMITTER HAS A KEYCHAIN

1 Review

  • 5
    ALARM-CONTROLS-RT-1T

    Posted by 93369 on Jan 8th 2016

Live Chat