Adams Rite 7100-310-628-00 Electric Strike 12VDC Fail Secure in Clear Anodized Finish, Door Electric Strike, Standard/Fail Secure, 12 Volt DC, Clear Anodized, With 4-7/8" Flat Faceplate, For Aluminum Door Also known as: 710031062800, R8-710031062, HES-710031062800 Adams Rite 7100-310-628-00 ELECTRIC STRIKE
Adams Rite Electric Strike 12VDC Fail Secure, Clear Anodized Faceplate, 7100-310-628
The 4-7/8" Electric Strike from the 7100 series "Faceplates are made specifically for Adams Rite deadlatches or cylindrical locksets with latchbolt projections ranging from 1/2" to 5/8". It offers remote electrical control of any door fitted with an Adams Rite Deadlatch or cylindrical (key-in-knob/lever) lockset with 1/2" to 5/8" latchbolt projection from the 4500, 4700, or 4900 Series (or a comparable model). Here, the strike jaw is unlocked by electrical actuation, releasing the latchbolt and allowing the door to be opened without actuating the latch itself. The incredibly small mechanism of the Adams Rite 7100 series glides into aluminum jamb (or opposing door) portions as shallow as 1-5/8 ". It readily fits the setup for the 7000, 7500, and 7800 series Adams Rite electric strikes that are no longer manufactured. |
Features:
- Clear Anodized Finish
- Aluminum construction
- 12V DC Continuous or Intermittent voltage operation
- Current Draw/Amps for 12V operation:
- AC Intermittent - 1.42A
- DC Continuous - 0.33A
- Stainless Steel Split-Jaw is included with 5/8" x 1-7/16" x 1/2" deep strike opening
- Available in Zinc-aluminum alloy case size of approximately 1" x 3-3/8" x 1-5/8" deep
- Provides electrical remote control, allowing door to open without depressing the panic hardware cross bar
- UL 1034 burglary-resistant listed hardware
- Fail Secure as standard
- Flat faceplate 1-1/4" x 4-7/8" is included as always
- Fail Secure feature - require power to be applied to unlock the strike lip which is locked on loss of power
|