Adams Rite 4550R-01-130 RH MS Deadlock Lever Trim
-
MPN: 4550R-01-130
-
JMAC ID: 200246605
The Adams Rite 4550R-01-130 is a commercial-grade MS Deadlock Lever designed to provide convenient interior locking and unlocking of compatible Adams Rite mortise deadlocks on narrow-stile aluminum and hollow metal doors. Featuring a right-hand/right-hand reverse configuration, 3-inch spring-loaded aluminum lever, integrated LOCKED/OPEN status indicator, and 130 aluminum-colored Ritecoat finish matching 628 clear anodized hardware, the assembly provides mechanical deadbolt operation without electrical power. The lever requires approximately 3 pounds of downward force to unlock, returns automatically to the horizontal position, and locks the deadbolt when rotated upward 90 degrees. Designed for 1-3/4-inch to 2-inch-thick doors, the 4550R-01-130 replaces an existing interior mortise cylinder or cylinder-type thumbturn while preserving exterior key operation. Its clutched mechanism helps protect internal locking components against excessive operating force. Compatible with selected Adams Rite MS1850S, MS1850SN, MS1950 deadlocks, and 1870/1870HM cylinder-operated flushbolts, the lever is suitable for commercial storefronts, offices, retail entrances, and institutional door hardware applications.
Adams Rite 4550R-01-130 MS Deadlock Lever, Right-Hand, Clear Aluminum Finish
The Adams Rite 4550R-01-130 MS Deadlock Lever provides mechanical interior operation for compatible Adams Rite MS Series mortise deadlocks used in commercial aluminum storefront and hollow metal doors. Manufactured by Adams Rite, an ASSA ABLOY company, the 4550 Series is designed to replace an existing interior key cylinder, cylinder-operated thumbturn, or compatible exit indicator with an accessible lever-operated locking assembly. The 4550R-01-130 configuration is specified for right-hand or right-hand reverse doors measuring 1-3/4 to 2 inches thick and features a 130 Ritecoat aluminum-colored finish that coordinates with 628 clear anodized architectural hardware. Its spring-loaded lever allows occupants to retract or extend the connected MS deadbolt without operating a key from the interior side. The integrated mechanical status window identifies whether the deadbolt is locked or open, helping users confirm the locking condition at a glance. Designed for commercial storefronts, offices, retail facilities, warehouses, and institutional entrances, the 4550R-01-130 provides a convenient lever-operated alternative to traditional interior thumbturn hardware while maintaining the existing mechanical deadlock system.
The 4550R-01-130 incorporates a cast aluminum housing, 3-inch (76.2 mm) end-return lever, spring-return mechanism, and clutch-protected operating assembly engineered for repeated commercial use. The manufacturer specifies an aluminum housing measuring approximately 1-3/8 inches wide by 7-1/2 inches long by 1 inch deep, providing a narrow profile suited to compatible aluminum door stiles. The lever requires approximately 3 pounds (1.36 kg) of downward operating force to unlock a properly installed MS deadlock, allowing convenient manual operation without excessive effort. An integrated mechanical indicator displays LOCKED in red lettering or OPEN in green lettering against a white background, with the displayed condition mechanically driven by the position of the connected deadbolt rather than by an electrical sensor. The lever incorporates a spring-loaded return mechanism that restores the handle to its horizontal position after operation. Its clutched operating mechanism helps protect internal lock components against damage from excessive force or improper lever operation. The 130 finish is a factory-applied aluminum-colored Ritecoat coating designed to visually match 628 clear anodized aluminum rather than an anodized finish applied directly to the lever housing.
For commercial mortise deadlock applications, the Adams Rite 4550R-01-130 provides direct mechanical operation of compatible MS pivoted-bolt locking mechanisms. Users rotate the interior lever 90 degrees downward to retract the deadbolt and unlock the door, then release the handle to allow the spring mechanism to return it to its horizontal resting position. To secure the opening, the lever is rotated 90 degrees upward to extend the deadbolt, after which the lever returns to horizontal while the bolt remains extended. The mechanical status indicator changes according to the actual position of the connected deadbolt, providing visual confirmation of the locking condition. Manufacturer-documented compatible locking products include Adams Rite MS1850S, MS1850SN, and MS1950 Series deadlocks, including supported Schoolhouse configurations, as well as 1870 and 1870HM Series cylinder-operated flushbolts. The assembly is also designed to preserve exterior mortise cylinder key operation when installed on a compatible deadlock. The 4550 is not compatible with 7/8-inch backset deadlocks, MS+1890 deadlock/deadlatch assemblies, or 2190 interconnected deadlock/deadlatch products. Because the lever mechanically operates the existing lock rather than replacing it, the associated deadlock and exterior cylinder must be correctly specified and installed separately.
Installation of the Adams Rite 4550R-01-130 interior deadlock lever requires a compatible MS Series lock case and door stile preparation conforming to the manufacturer's installation template. The assembly mounts at the existing interior cylinder location and uses a cam plug assembly, actuating hub, four mounting screws, and the appropriate indicator components to connect the lever to the deadlock mechanism. Installers remove the existing interior cylinder or thumbturn, prepare the required mounting and indicator openings, secure the operating cam, and align the lever drive mechanism with the deadbolt before completing installation. The manufacturer provides drive pins and installation hardware for both single-point deadlocks and compatible threshold-bolt locking systems. Although this model is supplied in a right-hand/right-hand reverse configuration, the 4550 lever can be rehanded in the field by repositioning the internal lever, stop plate, and return spring according to the installation instructions. Its housing extends approximately 11/16 inch forward of the cylinder backset centerline, so door stop clearance must be verified before installation, particularly on narrow-stile entrances with projecting frame stops. After mounting, technicians verify complete deadbolt extension and retraction, proper spring return, accurate LOCKED/OPEN indication, and continued exterior key operation. The 4550R-01-130 requires no batteries, electrical wiring, electronic credentials, or programming. Combining a compact cast aluminum housing, low-force lever operation, visible deadbolt status indication, and compatibility with established Adams Rite MS locking hardware, the 4550R-01-130 provides a practical mechanical trim solution for commercial aluminum entrance doors.
UPC: 999999397376
Also known as: R8-4550R0113, 4550R01130
Technical Specifications:
|
For more information about the Adams Rite 4550R-01-130, please contact us.