ACT Meters ACT CHROME 12V SLA Intelligent Battery Tester
-
MPN: ACT CHROME
-
JMAC ID: 200456998
The ACT Meters ACT CHROME is a 12V intelligent lead-acid battery tester designed to measure available battery capacity in fire alarm, security, and standby power systems. Using advanced pulsed-load technology to simulate a 20-hour (C20) discharge test in seconds, it evaluates 12V batteries rated from 1.2Ah to 200Ah and displays DC voltage and available ampere-hour capacity on a green backlit LCD. The tester features temperature compensation, reverse-polarity protection, and a 65% capacity reference chart. It includes battery terminal connectors, a carrying case, test labels, and a calibration certificate.
ACT Meters ACT CHROME 12V Intelligent Lead-Acid Battery Capacity Tester
The ACT Meters ACT CHROME Intelligent Battery Tester is a portable diagnostic instrument designed to evaluate the available capacity and voltage of 12V lead-acid batteries used in critical standby power applications. Manufactured by ACT Meters, the ACT CHROME uses advanced pulsed-load analysis technology to simulate a full 20-hour (C20) battery discharge test in seconds, allowing technicians to assess battery condition without performing a conventional 20-hour discharge procedure. The tester supports 12V sealed lead-acid (SLA), absorbed glass mat (AGM), and compatible flooded lead-acid batteries rated from 1.2Ah to 200Ah. Applications include fire alarm control panels, intrusion alarm systems, emergency lighting equipment, access control power supplies, UPS installations, and other systems that rely on lead-acid batteries for backup electrical power.
The ACT CHROME measures DC battery voltage and estimated available ampere-hour (Ah) capacity, presenting both values on a clear green backlit LCD. Its pulsed-load testing method analyzes battery performance under an applied electrical load and calculates available capacity based on the battery's temperature and state of charge. Built-in temperature compensation helps technicians interpret capacity changes caused by environmental conditions, while an integrated temperature-sensitive strip provides a reference for the surrounding temperature. The manufacturer specifies DC voltage accuracy of 5% and ampere-hour accuracy of 10% for fully charged, premium-brand C20-rated SLA batteries tested between 20 C and 25 C. The tester simulates discharge performance to a 10.50VDC endpoint and includes a low-battery warning for batteries measuring below 10.50VDC. Unlike conventional voltage-only battery testers, the ACT CHROME provides an estimate of the battery's usable reserve capacity, helping identify batteries that maintain normal voltage but have deteriorated storage capability.
Designed for fire and security system preventive maintenance, the ACT Meters ACT CHROME provides a practical method of checking backup batteries during system inspections, servicing, and replacement evaluations. A reference chart on the side of the instrument helps technicians compare measured capacity against the battery's rated Ah value and identify batteries that have fallen below 65% of their stated capacity, the manufacturer's published recharge-or-replace reference threshold. This functionality supports assessment of new batteries before installation and identification of older batteries affected by aging, excessive temperature, undercharging, or other operating conditions. The tester is powered directly by the battery under test, eliminating the need for separate operating batteries or an external power adapter. Its reverse-polarity protection helps guard against incorrect test-lead connections, while an internal over-temperature protection function limits repeated load testing to five test cycles within 30 minutes. Accurate measurements require firm, low-resistance connections directly to clean battery terminals.
The ACT CHROME features a compact metal and plastic enclosure measuring 100mm wide, 55mm high, and 35mm deep, making it convenient for portable field testing and service work. Its standard package includes the ACT 3532 battery terminal connectors, ACT 410N soft carrying case, sample ACT BTL battery test labels, operating instructions, and a certificate of calibration. The supplied terminal connectors help technicians obtain reliable measurements on batteries with recessed or difficult-to-access terminals, while the labels provide a convenient method of recording battery test results for future maintenance reference. The instrument is intended for 12V batteries only, with a maximum permitted input of 15VDC, and batteries must be isolated from charging equipment before testing. ACT Meters recommends periodic calibration verification to maintain measurement accuracy, with replacement calibrated test leads available for servicing. Backed by a 12-month manufacturer warranty, the ACT CHROME provides a portable battery capacity testing solution for technicians maintaining fire alarm, security, emergency power, and other lead-acid standby battery systems.
UPC: 895350011116
Also known as: B6-ACTCHROME, ACTCHROME
Technical Specifications:
|
For more information about the ACT Meters ACT CHROME, please contact us.
- Free from complicated settings and functions
- Designed for 12V standby SLA batteries between 1.2Ah and 200Ah
- Simulates a 20 hour (C20) discharge test in seconds
- Compact design and simple operation
- Powered by the battery under test
- Automatically displays the DC Voltage and available Ampere hour (Ah) capacity
- Reverse polarity protection
1 Review
-
ACT-METERS-ACTCHROME