Operators

Low Energy Swing Door Operators

SDC AUTO series low energy swing door operators are made for single door operation with one drive unit or double door operation with two drive units. Every operator in this category runs on 24V, has a NO/NC relay, and is non-handed, with a 3 hour fire rating, UL10C listing, and BAA qualification.

The AUTOS136V is a single door operator with a push arm and 20mm spindle for 36 inch doors, and the AUTOS142V is its 42 inch counterpart. The AUTOS236V and AUTOS248V use pull arms, for 36 inch and 48 inch doors. The AUTOP184V is an 84 inch double door operator with two drive units and push arms, and the AUTOP172X is a 72 inch double push model in dark bronze anodized aluminum. Models ending in V have a 628/US28 satin aluminum clear anodized finish, and models ending in X have a 313 dark bronze anodized aluminum finish.

The AUTOS336V is a low energy surface mounted electromechanical door operator mounted on the push or pull side at the top jamb, for doors up to 36 inches, with a 130 degree swing and machine and wood screws. The AUTOP484V double egress operator combines a double lever arm regular and a slide track arm standard with dead stop for doors up to 84 inches, and the AUTOS242V and AUTOS348V are Grade 1 low energy surface mounted electromechanical door operators.

Add presence sensors and switches, or see push plates and panels and bollards. Browse the full SDC catalog. Contact our team for questions about door width and arm type.

Live Chat