Knowledge Base:  

How do I change the battery for my E-Digital Lock remote?


Last Updated: 12/16/2013
By

The Lockey E-Remote is powered by a CR2025 lithium button cell battery. Follow the instructions below to change it.

1. With a slotted head screwdriver, open the cover.
2. Remove the old button cell battery and replace with a new CR2025. Make sure not to insert the batteries backwards. Doing so could cause the remote to breakdown.
3. Shut the cover and the remote should be fully functional.

Note: Remote control settings will not be lost or erased when the battery is replaced.


The Lockey E-Remote...
can lock and unlock E-Digital Electronic Locks from up to 15 meters away. Pressing the lock button on the remote locks the door. Two green flashes and 2 short beeps will follow. Pressing the unlock button will unlock the door, and two green flashes/audible beeps will follow.


Similar Products:
E-PRO-R Electronic Lever Lock w/ Touch-Screen
E-930R Electronic Knob Lock
E-985R Lever Lock
E-910R Electronic Deadbolt


Was this article helpful?

:
 

Related Articles
 >

How do I program my Lockey E-Remote?