Knowledge Base:  

How do you disable all user codes on the E985-R Lever Lock?


Last Updated: 12/13/2013
By

There are two ways to disable user codes on the E985-R Lever Lock.


First, you can program the E985-R to disable user codes. Doing so will not delete the codes, but simply deactivate them. At this point, the lock can only be operated using a traditional key. The other option is to delete all user codes. Doing so will have the same affect as disabling user codes, except the codes cannot be reactivated. They have to be reprogrammed into the device all together.

To disable user codes: Click "Enter PC," "E-Digital," the number (8), and "E-Digital". To enable user codes, simply repeat the programming steps for disabling.

To delete all user codes: Select "Enter PC," push the "E-Digital" button, the number (3), and then finally the "E-Digital" button.

The E985-R must be unlocked in order to perform any programming functions.


Similar Products:
Lockey E-Remote
E-930R Electronic Knob Lock
E-910 Electronic Deadbolt



Was this article helpful?

Comments:
 

Related Articles
 >

Where should I store the override key for my E985-R Electronic Lever Lock?


 >

How do I install the E985-R mounting plate?


 >

How do I install the receiver module for the E985-R Electronic Lever Lock?


 >

How do I change the lever handling on my E985-R Lever Lock?


 >

What is the "E-Digital" button on my E985-R keypad used for?


 >

How do I set the autolock time delay function on the E985-R Lever Lock?


 >

How do I program a disposable user code into the E985-R Lever Lock?


 >

If you delete all user codes from the E985-R, will the door still lock?


 >

What is the programming code for my Lockey E985-R Lever Lock?


 >

What do the different light indicators mean on my E985-R Lever Lock?


 >

Is there a way to restore the E985-R Lever Lock back to its factory settings?


 >

Can you mute sounds on the E985-R Lever Lock?


 >

Does the E985-R glow in the dark?