UTC Interlogix (Formerly GE Security/Caddx) TX-8010-01-1 DesignLine Garage Door Sensor

The DesignLine Garage Door Sensor extends intrusion protection to garage structures, enabling users to regularly monitor the doors opening for complete home security. Once armed, if the garage door opens to a 45 angle, the sensor goes into an alarm condition which can turn on the siren and automatically call the central monitoring station. Under normal use, the sensor will transmit an open and close signal to the panel each time the garage door is opened or closed.

To prevent false alarms, this sensor comes equipped with a built-in one-second delay feature in case the garage door shakes during windy conditions. In addition, the sensor also sends a supervisory signal to the panel every 64 minutes and is equipped with a cover tamper for added security.

UPC: 782136723502
Also known as: CA-TX8010011, GES-TX8010011, TX8010011

Technical Specifications: FCC Standard: FCC Part 15 Color: Belgian Gray Dimensions (WxHxD): 1.7 x 0.91 x 1.10 in. (4.32 x 23.2 x 2.76 cm) Weight: 0.63 oz. (18g) Enclosure: PC-540 Operating Temperature: 10°F (-12°C) to 120°F (49°C) Supervisory Interval: 64 minutes Tilt Switch Angle: 45° Peak Field Strength: Typical 35,000 uV/m @ 3m Unique ID Codes: 16 million Modulation Type: Amplitude Shift Key (ASK) Bandwidth: 24 kHz Transmitter Frequency Tolerance: +/- 8 kHz Transmitter Frequency: 319.508 MHz (crystal-controlled) Typical Battery Life: 5 years Battery: CR2032, 3VDC, 225mAh, Lithium Coin Cell

For more information about the UTC (Formerly GE Security/Caddx) TX-8010-01-1, please contact us.