 |
 |
 |
|
Seco-Larm SK-1123-FQ ENFORCER Flush-Mount Outdoor Access Keypad, 100 Users, 2 Outputs (1 Relay, 1 Transistor Ground)
Also known as: SK1123FQ, SL-SK1123FQ
The Seco-Larm SK-1123-FQ is an outdoor, flush mount, access keypad. Perfect for offices, commercial, and home security installations, the keypad uses simple numeric codes for arming and disarming.
The backlit display makes it easy to operate in the dark. The backlit function can be programmed via a jumper for full, partial, or no illumination. The door auto relock setting lets the keypad relock an open door either when the relock time expires or immediately after the door is closed to prevent unauthorized entry.
The duress output feature triggers a silent alarm if an authorized user is forced (by an unauthorized person) to use the keypad. The duress output is activated by adding the number (2) to the first digit of user code (1). In this case, the protected door opens as it would normally, but a silent signal is sent to a remote device to call for help.
All programming and code information is stored in the EEPROM memory to protect the data in case of a power loss. |
Features:
- Suitable for flush-mount applications. Fits conveniently in back box
- 2 Outputs: Main relay (Form C 5A@30VDC), Auxiliary (Transistor ground 100mA@24VDC)
- Relay can be programmed for momentary (1~999 seconds) or latch
- Programmable LED keys: Full-time ON, ON when keys are pressed, Full-time OFF; suitable for solar applications
- Code flexibility: Each code can be 4~8 digits long
- Egress input for exiting the protected premises
- Dual voltage: 12~24 VDC/VAC operation
- Tamper switch: N.C. dry contact 3A@12VDC
- Mantrap: For a protected area with 2 doors, this feature allows only 1 door to be open at any time
- All features are programmed directly from the keypad, eliminating the need for an external programmer
- Duress output: Signals a silent alarm if an authorized user is forced to open the door under duress
- Door-forced-open and door-propped-open alarm output
- Door-hold-open mode available
- Keypad can be programmed to emit beeps for key presses or operate in silent mode
- Auto or manual code entry checking: Auto: No # key required after each code, Manual: # key must be pressed after every code
|
Technical Specifications:
- Operating Voltage: 12~24 VDC/VAC
- Current Draw: Standby 10mA@12VDC, Key Pressed 45mA@12VDC, Relay active 100mA@12VDC
- Number of Coded Outputs: 2
- Transistor Ground Output (1): 100mA@24VDC
- Relay Output (2): 5A@28VDC, Form C, NO/C/NC
- Additional Output: Mantrap and duress
- Egress: N.O. Ground, 3A@12VDC
- Door Sensor Input: N.C. Ground
- Dimensions: 4-3/4" x 3-1/8" x 1-15/16" (120 mm x 80 mm x 46mm)
- Weight: 11 oz (300g)
|
UPC: 676544010364
Average rating: 5.0, based on
2 reviews
For more information about the Seco-Larm SK-1123-FQ, please contact us.
|
|
|
 |
|
 |
|
