Potter Amseco NGP-SPV Self-Purging Valve Kit

The Potter Nitrogen Self Purge valve (NGP-SPV) is designed to work with Potter Nitrogen Generators Systems to effectively purge corrosive oxygen from a fire sprinkler system while maintaining adequate system pressure. Potter's Self Purge Valve is the easiest way to ensure high purity nitrogen is equally distributed throughout the fire sprinkler system. Simply install the NGP-SPV off a tee connection at the end of the sprinkler system. No electrical connections are required. When the nitrogen generator is in operation the purge orifice automatically bleeds out the oxygen as well as the residual moisture in the system. The purge valve also provides a sampling port to monitor the nitrogen purity within the system piping.

In the event of an alarm condition the NGP-SPV has a built in high pressure water shut-off valve that automatically closes when the water reaches the vent. A plug is supplied to keep the purge orifice free of debris when not in use. A ball valve allows for isolation of the assembly, maintinance of strainer screen, replacement of air vent, or maintinance of the purge orifice.

UPC: 785192021001
Also known as: PL-1119784

Technical Specifications: Air Purity: ISO Class 1.4.1 or better: Free of water 38°F (3°C) Dew Point, compressor oil (0.008 PPM or .01 mg/m3), hydrocarbons, and particles (<0.01 μm microns) Temperature Range: 50°F (10°C) to 110°F (43°C) Max operating Pressure: 100 PSI Mounting Holes: (4) ½” Ø Fire Sprinkler System Connection: ½” Female NPT Power Supply Available: in 115V (7.4A), 208V (3.5A), 230V (3.7A), single phase Weight: 350 lbs Size (HxWxD): 50” x 41” x 28”

For more information about the Potter / Amseco 1119784, please contact us.