Napco GEM-P3200 Hybrid Security Panel Control Panel/Communicator

Napco's Gemini GEM-P3200 is a state-of-the-art microcomputer-based burglary and residential fire alarm control panel of modular design. Integrally an 8-zone panel, it will support up to 32 zones with optional zone expansion modules, wireless receiver modules and/or GEM-RP1CA/RP1CAe/RP1CAe2 Keypads. Each panel includes an integral digital communicator.

The control panel features programmable area partitioning. That is, the system may be divided into up to two discrete multiple-zone areas, each allowing access by only those users programmed for their respective area.

Technical Specifications: Designer keypad dimensions: 4 3/8” x 5 7/8” x 1 1/6” (HWD); 11.1cm x 14.9cm x 2.7cm (HWD) Maximum number of keypads: 7. Maximum wiring length for each run (#22AWG): 1000’ divided by total number of keypads & EZMs on run Keypad current: GEM-RP1CAe2: 100mA; 35mA if backlighting is disabled (cut W1, W2 & W3) PGM Output: 5mA, 12V special application EZM module: GEM-EZM8: Input, 50mA (including PGM output. PGM output: 5mA, 12V special application) Standby time: residential fire/burglary & commercial burglary, 4 hours min. 650 mA combined standby current (remote power + aux. power + reset relay power) Remote power output: 12Vdc regulated (for keypads) Auxiliary power output: 12Vdc regulated Relay outputs (burglary; reset; aux): wet, 12Vdc, 1.2A max.; dry (cut related jumper for dry contacts), SPDT contacts 24Vdc, 2A, 0: 6 PF Loop resistance: 300W max.; 50W for 2-wire smoke detector zones Loop current:2.5mA with 2.2ohm end-of-line resistor (model EOL2.2K); 5mA for 2-wire smoke-detector zones Loop voltage: 10-13Vdc Input power: 16.5Vac via Class 2 Plug-In 40VA transformer Operating temperature: 0-49ºC (32-120ºF)

For more information about the Napco GEMP3200, please contact us.