EtherWAN SDR-480-48 480W/10A DIN-Rail 48VDC Industrial Power Supply

The EtherWAN SDR-480-48 is a 480W/10A DIN-rail 48VDC industrial power supply.

UPC: 999999375593
Also known as: ET-SDR48048, SDR48048

Technical Specifications: Dimensions: 85.5mm (W) x 128.5mm (D) x 125.2 mm(H) (3.42" (W) x 5.14" (D) x 5.01" (H)) Storage Humidity: 10% to 95%RH Working Humidity: 20% to 90%RH non-condensing Storage Temperature: -40°C to 85°C (-40°F to 158°F) Operating Temperature: -25°C to 70°C (Refer to output load derating curve) Over Temperature Protection: 105°C ± 5°C (TSW : detect on heatsink of power switch); Shut down o/p voltage, recovers automatically after temperature goes down Over Load Protection: Normally works within 110 to 150% rated output power for more than 3 seconds and then shut down o/p voltage with auto-recovery Protection type : Hiccup mode, recovers automatically after fault condition is removed Over Voltage Protection: 56 - 65V Installation: DIN-Rail Weight: 1.6kg (3.52 lb) Casing: Aluminum case Hold up Time: 14ms/230VAC at full load Setup, Rise Time: 1500ms, 150ms/230VAC 3000ms, 150ms/115VAC at full load Load Regulation: ± 1.0% Line Regulation: ± 0.5% Voltage Tolerance: ± 1.0% Ripple & Noise (max.): 120mVp-p Peak Current 15A Peak Power: 720W (3sec.) Rated Power: 480W Current Range: 0 to 10A DC Voltage: 48V Rated Current: 10A Leakage Current: <0.8mA / 240VAC Inrush Current (Typ.): 40A/115VAC; 80A/230VAC AC Current (Typ.): 5A/115VAC; 2.5A/230VAC Efficiency: 94% 0.99 / 115VAC at full load Power Factor (Typ.): 0.94 / 230VAC; Frequency Range: 47 to 63Hz Voltage Range: 90 to 240VAC or 127 to 370VDC

For more information about the EtherWAN SDR-480-48, please contact us.