516-812-0917
Help
Live Chat
Dynalock 2511-ATS-DSM-DYN-LED Mini-Mag Electromagnetic Lock, 650lbs, Single Outswinging Door, Single Coil, Satin Aluminum
-
MPN: 2511 ATS DSM DYN LED
-
JMAC ID: 200316612
The Dynalock 2511-ATS-DSM-DYN-LED is a 650 lb holding force mini maglock for a single outswinging door. The unit is equipped with an anti-tamper switch, a door status switch, a dynastat force sensor, and bi-color LED.
The 2511-ATS-DSM-DYN-LED is comprised of 3 basic components: a lock housing, an electromagnetic coil, and an armature. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The 2511-ATS-DSM-DYN-LED is ideal for interior office doors, clean room interlocks, tool cribs, and x-ray areas.
Also known as: 2511ATSDSMDYNLED
For more information about the Dynalock 2511 ATS DSM DYN LED, please contact us.
The 2511-ATS-DSM-DYN-LED is comprised of 3 basic components: a lock housing, an electromagnetic coil, and an armature. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The 2511-ATS-DSM-DYN-LED is ideal for interior office doors, clean room interlocks, tool cribs, and x-ray areas.
Also known as: 2511ATSDSMDYNLED
Technical Specifications:
|
For more information about the Dynalock 2511 ATS DSM DYN LED, please contact us.
- Anti-tamper switch - signals removal of the wiring chamber cover
- Door status switch - signals if a door is closed or ajar
- Dynastat force sensor - indicates an efficient magnetic bond
- Bi-color LED - for local signaling of lock status
- Satin aluminum finish
- A Totally Plated Coil and armature provides protection against corrosion.
- Built-In Spike Suppression protects other solid state components within the system from damage when the lock is de-energized.
- Narrow Backset - A thin lock section (1-1/4”) may mean the elimination of additional mounting brackets.
- No Residual Magnetism - The lock releases without delay when de-energized.
- Holding Force - 650 lbs. holding force provides for effective traffic control. Examples include interior office doors, clean room interlocks, tool cribs, and x-ray areas.
- 4 Operating Voltages - 12 or 24 VDC or VAC for installation flexibility and to reduce stock.
- Low Power Consumption conserves energy, reduces operating cost, and extends battery backup time.
- Single outswinging door
- Single coil
- Mounts to the underside of the frame header
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
