516-812-0917
Help
Live Chat
Dynalock 2011-HSM-US10B Electromagnetic Lock, 1200lbs, Single Outswinging Door, Door Status Switch, Dynastat Force Sensor, Oil Rubbed Bronze
-
MPN: 2011 HSM US10B
-
JMAC ID: 200316512
The Dynalock 2011-HSM-US10B is a full size 1200 lbs. holding force electromagnet. It is designed for life safety and high security on rated or nonrated doors and frames. Specify for commercial, industrial, or institutional openings when low cost and high security are required.
The 2011-HSM-US10B lock is designed for ease of installation with adjustable mounting, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate "door contacts".
The 2011-HSM-US10B is designed for a single outswinging door. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a door status switch & Dynastat force sensor and features an oil rubbed bronze finish.
Also known as: 2011HSMUS10B
For more information about the Dynalock 2011 HSM US10B, please contact us.
The 2011-HSM-US10B lock is designed for ease of installation with adjustable mounting, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate "door contacts".
The 2011-HSM-US10B is designed for a single outswinging door. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a door status switch & Dynastat force sensor and features an oil rubbed bronze finish.
Also known as: 2011HSMUS10B
Technical Specifications:
|
For more information about the Dynalock 2011 HSM US10B, please contact us.
- Single outswinging door
- Single coil
- Multiple sensor and monitor options increases flexibility, security and compatibility with system equipment
- No residual magnetism - the door releases without delay when lock is de-energized.
- A narrow backset of 1-1/2” may mean the elimination of other mounting brackets or filler plates
- A totally plated coil and armature provides protection against corrosion
- Oil rubbed bronze finish
- Dynastat force sensor - indicates efficient magnetic bond. Sensor features SPDT contacts
- Door status switch - signals if the door is closed or ajar
- Lifetime Warranty - American Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks
- Built-in spike suppression protects other solid state components within the system from damage when the lock is de-energized
- Internal wiring compartment includes built-in circuit board attached to access cover to provide a convenient, plug in, concealed area for wiring connections
- Low power consumption conserves energy, reduces operation cost, and extends battery backup time
- 2011 HSM US10B Data Sheet
- Installation Manual
- 2513/2513 GLB Instructions
- 2282-TJ82 Instructions
- 2500 x LCB Series Wiring Diagram & Instructions
- 2000 Series 1200 Lbs. Holding Force Electromagnetic Locks
- 4951 Series Dimensional Drawing
- 2202-392 Instructions
- 2268 Instructions
- 2268-TJ10 Instructions
- 2268xDSE Instructions
- 2280 Instructions
- 2585 Instructions
- 2585xTH85 Instructions
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
