Cooper Wheelock RSSR24MCWNR
-
MPN: RSSR24MCWNR
-
JMAC ID: 200275971
The COOPER-WHEELOCK-RSSR24MCWNR red strobe with a red lens designed for wall mount applications. The unit has low current draw with outstanding performance, reliability and cost-effectiveness. The strobe has a multi-candela rating of 15/30/75/110cd and is UL Listed under Standard 1638 for Emergency signaling.
The RSSR24MCWNR uses a Xenon flashtube enclosed in a rugged Lexan red lens dependable visual signaling. The unit may be synchronized when used with the Series SM or DSM Sync Module(s) or Wheelocks POWERPATH Power Supplies with Wheelocks Patented Sync Protocol.
The RSSR24MCWNR employs an integral, strobe mounting plate that makes it easy to mount to a variety of backboxes. The strobe can be mounted to single-gang, double-gang, 4" square, 100mm European backboxes or the SHBB surface backbox. An attractive cover plate is provided for a clean, finished appearance.
For more information about the Cooper Wheelock RSSR24MCWNR, please contact us.
The RSSR24MCWNR uses a Xenon flashtube enclosed in a rugged Lexan red lens dependable visual signaling. The unit may be synchronized when used with the Series SM or DSM Sync Module(s) or Wheelocks POWERPATH Power Supplies with Wheelocks Patented Sync Protocol.
The RSSR24MCWNR employs an integral, strobe mounting plate that makes it easy to mount to a variety of backboxes. The strobe can be mounted to single-gang, double-gang, 4" square, 100mm European backboxes or the SHBB surface backbox. An attractive cover plate is provided for a clean, finished appearance.
Technical Specifications:
|
For more information about the Cooper Wheelock RSSR24MCWNR, please contact us.
- Multi-Candela available with Field Selectable Candela Settings of 15/30/75/110cd
- Fast installation with IN/OUT screw terminals using #12 to #18 AWG wire
- Synchronize using the Wheelock sync modules or panels with built-in Wheelock Patented Sync Protocol
- 12 and 24 VDC models with wide UL “Regulated Voltage” using filtered (DC) or unfiltered VRMS input voltage
- Strobes produce 1 flash per second over the regulated voltage range