Bosch B810 Wireless SDI2 Bus Interface

The B810 is a wireless receiver that connects RADION wireless peripherals such as the motion and specialty detectors, keyfobs, panic buttons, door window contacts, repeaters, and more, to supported Bosch control panels using the SDI2 Bus connection. The receiver supports RF communication at 433.42 MHz This frequency features improved penetration, reflection, and refraction of signal for superior range, and reliability. The receiver also features dual antennas to achieve spatial and polar diversity to further improve RF communication reliability. Enclosed within the receiver housing for higher security, the receiver is equipped with tamper protection, and detects and reports radio frequency interferences.

The receiver supports supervision of wireless points (504), key fobs (1000), and repeaters (8). The receiver can be easily accessed and configured for a compatible control panel using the address switch on the back of the receiver housing. The receiver address switch provides a single-digit setting for the receivers address, allowing for ease of installation.

UPC: 800549824293
Also known as: BOS-B810

Technical Specifications: Use: Intended for indoor use Relative humidity: Up to 93% non-condensing Operating Environment: 0ﾟC to +49ﾟC (+32ﾟF to +120ﾟF ) Frequency: 433.42 MHz Maximum current draw: 70 mA Power/voltage: 10-14 VDC, 12 VDC nominal Tamper detection: Transmits a tamper switch signal when the unit is removed from its base, or the mounting surface. Wiring gauge: 0.65 mm (22 AWG) to 2.0 mm (18 AWG) Wiring distance: 243 m (800 ft) Dimensions: 139.70 mm x 209.60 mm x 31.80 mm (5.50 in x 8.25 in x 1.25 in)

For more information about the Bosch Security B810, please contact us.