Bogen V60

MPN: V60
JMAC ID: 200102948

$732.00

JMAC_ID:: 200102948
df_manual_boost:: 1.75

Product Resources

We're here to help

Request a Quote

Low Price Guarantee

The Bogen V60 Power Vector 60W modular amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems.

The amplifier includes eight module bays for plug-in input modules and allows up to four levels of priority between modules. Two module bays are capable of accepting plug-in signal-processing output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LEDoutput meter monitors output signal level.

The unit includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).

UPC: 765368391152
Also known as: BO-V60, BOG-V60

Technical Specifications:

Limited Warranty: 2 Year
Input Voltage (V AC): 110
Width (mm): 419.1
Impedance: 4, 8 Ohm
Width: 16.5"
Depth: 12"
Height: 3.5"
Input Voltage: 110 V AC
Maximum Frequency Response (Hz): 20000
Minimum Frequency Response (Hz): 45
Maximum Frequency Response: 20 kHz
Minimum Frequency Response: 45 Hz
RMS Output Power: 60 W
RMS Output Power (W): 60
Total Harmonic Distortion (THD): 0.5%
Total Harmonic Distortion (THD) (%): 0.5
Depth (mm): 304.8
Height (mm): 88.9
Weight (Approximate): 28 lb
Audio Channels: 8
Weight (Approximate) (g): 12700.586
Product Type: Amplifier
Product Line: Power Vector

For more information about the Bogen V60, please contact us.

11-segment LED output level meter monitors the output level of the power amplifier with Avg./Peak meter switch
2 rack spaces high (3-1/2")
Push-button remote volume control panel (Model RVCP, sold separately)
Security cover to selectively protect volume, bass, and treble controls (Model PVSC, sold separately)
Rack mountable (with rack mounting kit RPK87, sold separately)
Independent volume control for each of the eight module bays
Bass and treble control with bypass switch (located in module bay 6)
125 Hz Low Cut switch (located in module bay 6)
Signal-processing insert jacks allow external equipment to be inserted between the pre-amp output and the power amp input
Pre-EQ, unbalanced, buffered output signal (“post” all unit controls, but “pre” any external “Insert” equipment connected)
Listed to UL Standard 60065 for U.S. and Canada
Grounded, unswitched AC convenience receptacle with a 500W maximum capacity provided for external equipment
8 module security cover/filler plates included with amplifier (PVMC)
Two-color LED for each channel indicates input signal or clipping
Bridging jack and Mute terminals join multiple Power Vector amps and mixers together
External access to priority mute buses
Bridging In/Out connector
5-position barrier strip, with clamping washers, provides connections for speaker loads
Lockable switch permits user to select either transformer-coupled outputs or a direct lowimpedance output
Motorized master volume control can be remotely operated
2 module bays capable of handling plug-in signal processing output modules
4 levels of priority between modules
Wide selection of advanced plug-in modules (modules sold separately)
8 module bays
Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads