Bogen C20

The Bogen C20 is a 20W public address amplifier that is designed with discreet complementary transistor circuitry to assure maximum reliability of power output stages.

The amplifiers accommodate low-impedance microphones and high-impedance auxiliary sources. A front panel selector switch offers a choice of either two low-impedance balanced microphones (MIC1, MIC2), or one microphone and one auxiliary input (MIC1, AUX). The AUX input can be muted when a customer-supplied SPST normally open switch is used for microphone precedence. Independent volume controls and a treble control, for tonal balance, are provided.

Balanced and unbalanced outputs are provided for 4-, 8-, and 16-ohm speakers and for 25- and 70-volt constant voltage systems. An accessory transformer, Bogen Model WMT1A, can be installed to provide input- and outputmatching to a telephone line.

The amplifiers operate from a 120~, 60Hz source. A thermostat enclosed in the power transformer protects the unit against overloads.

UPC: 765368330250
Also known as: BO-C20, BOG-C20

Technical Specifications: RMS Output Power (W): 20 Depth: 7.4" Width: 11.4" Height: 2.9" Minimum Frequency Response: 70 Hz RMS Output Power: 20 W Operating Power Consumption (W): 50 Signal to Noise Ratio (SNR) (dB): 70 Operating Power Consumption: 50 W Number of Analog Audio Inputs: 1 Input Voltage (V AC): 120 Package Contents: Classic C20 AmplifierLine-Matching TransformerRack Panel KitIn-Wall Mounting Kit Product Type: Amplifier Product Line: Classic Weight (Approximate) (g): 2721.554 Audio Channels: 4 Depth (mm): 187.325 Maximum Frequency Response (Hz): 16000 Minimum Frequency Response (Hz): 70 Maximum Frequency Response: 16 kHz Impedance: 16 Ohm, 4, 8 Features: Overheat Protection Input Voltage: 120 V AC Width (mm): 288.925 Weight (Approximate): 6 lb Height (mm): 73.025 Limited Warranty: 2 Year Product Series: C

For more information about the Bogen C20, please contact us.