American Fibertek RR-86-2F13-S Two Fiber Bi-directional Telephone Line Extender System, Single Mode, Rack Card Phone Line Interface

The American Fibertek 86-2F13S Series transmits and receives standard telephone signals on two singlemode optical fibers using AM/FSK transmission. This system is designed to be completely transparent to all telephony signals including ring, off-hook, hook-switch flash and forward disconnect. Products require no field adjustments at installation or additional maintenance thereafter. Diagnostic Indicators provide a quick visual indication of system status. The 86 Series are ordered as stand alone modules or rack cards that are mounted in the American Fibertek Card Cages: SR-20/2 or SR-20R/1.

The 86 series product configurations include 2 fiber units at 850 or 1300nm and an MX or RX series talk down (order wire) phone system. Contact the factory for details. These units have been optimized for equipment with Data rates up to 14.4Kbs. Please consult the factory for other requirements.

UPC: 809100020549
Also known as: AZ-RR862F13S, RR862F13S

Technical Specifications: Connector: ST Loss Budget (9/125µ): 12dB Wavelength: 1310 nm Connector: Terminal Block Max Current: 0.5A Max Voltage: 100 VDC or Peak AC Response Time: 2ms Output: Dry Contact Input: Switch Closure to Ground Connector: RJ11 SNR: 60 dB Dimensions: Requires one rack slot Power Supply: SR 20/2 Temperature (Operating): -40°C to +75°C, non-condensing Audio Bandwidth: 4 KHz I/0 Impedance: 600 Ohms I/0 Level: 0 dBm

For more information about the American Fibertek RR-86-2F13-S, please contact us.