Altronix ACM4E 4 OUTPUT ACCESS POWER CONTROLLER MODULE

Also known as: AX-ACM4E, ALT-ACM4E

4 OUTPUT ACCESS POWER CONTROLLER MODULE - CONVERTS ONE (1) 12 TO 24 VOLT AC OR DC INPUT INTO FOUR (4) FUSED POWER OUTPUT

ACM4E unit converts one (1) 12 to 24 volt AC or DC input into four (4) independently controlled fuse protected outputs. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four (4) outputs.

Technical Specifications:

Weight (Approximate): 6.60 lb
Depth: 3.5"
Width: 7.5"
Width (mm): 190.5
Height (mm): 215.9
Series: Altronix Power Supplies
Output Voltage: 12 V DC
Environmental Certification: RoHS
Product Type: Power Module
Product Series: ACM
Packaged Quantity: 1
Environmentally Friendly: Yes
Country of Origin: United States
Compatibility: Card ReaderAccess Control Devices:Mag LockElectric StrikeMagnetic Door Holder
Certifications & Standards: UL294CSA C22.2 No.205-M1983
Limited Warranty: Lifetime
Height: 8.5"
Weight (Approximate) (g): 2993.71
Depth (mm): 88.9