Inovonics
Inovonics has engineered commercial wireless for security and monitoring since 1986. Its EchoStream platform is a high-power, frequency-agile 900 MHz network built for range, low latency, and resilience in difficult RF environments, with supervised endpoints that check in so a missing or low-battery device is flagged at the head end. Because EchoStream is panel-agnostic, it pairs with virtually any alarm panel, letting an installer add wireless points to the system already in place. The Inovonics line runs from transmitters and sensors through the receivers, repeaters, and gateways that tie them together.
Wireless Transmitters and Sensors
Transmitters are the core of an Inovonics system. Universal transmitters such as the EN1210 monitor door and window contacts or any dry-contact and end-of-line input, while PIR motion transmitters add pet-immune intrusion detection and the EN1244 brings wireless smoke detection onto the network. For environmental and facility monitoring, specialty sensors cover water and leak detection, temperature, glassbreak, and pulse-meter submetering, so one wireless backbone carries security and building-monitoring points at once. Legacy Frequency Agile (FA-series) transmitters remain available for existing installations.
Duress and Emergency Call Pendants
Single- and double-button pendant transmitters, including the EN1223 and EN1235 families, handle personal duress, hold-up, and emergency call. Fixed and wearable formats serve commercial duress at teller windows and reception desks as well as nurse-call and resident monitoring in assisted living and senior care. Pair them with neck cords, belt clips, and pendant packs from accessories and batteries.
Receivers, Repeaters, and Gateways
At the head end, receivers such as the EN4216MR and EN4232MR map wireless points to panel zones through relay or serial outputs, and serial models report to the host system directly. Repeaters like the high-power EN5040 extend range and route around obstructions in the EchoStream mesh, while IP gateways bridge the wireless network to IP-based and third-party platforms for larger or networked sites.
Accessories, Batteries, and System Tools
Keep a network running with replacement batteries, enclosures, and mounting accessories, and plan and verify coverage before install with the survey and system tools that measure signal strength across the site.
Need Help Specifying an Inovonics System?
Matching transmitters, receivers, and repeaters to a site's size and RF conditions takes planning. Contact our team and we will help you design a reliable EchoStream network for your application.