Gentex GEC3-24WR 24V Selectable Candela Horn Strobe Red

  • MPN: GEC3-24WR
  • JMAC ID: 200088377
$45.88
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200088377
df_manual_boost:
2.20
Please Note: In order to keep our prices low, we have a minimum order requirement of $99

The Gentex GEC3-24WR is a red, wall-mounted 24 VDC Commander3 fire alarm horn/strobe with five field-selectable candela settings of 15, 30, 60, 75, and 110 cd for audible and visual emergency notification. It features selectable mechanical, 2400 Hz, chime, and whoop tones, high/low sound output, and continuous or temporal-three alarm patterns. The GEC3-24WR incorporates Gentex Super-Slide mounting technology, Checkmate voltage verification, and synchronization compatibility with Gentex AVSM modules. The indoor notification appliance is listed to ANSI/UL 464 and ANSI/UL 1971.

Gentex GEC3-24WR Commander3 Red 24V Selectable Candela Horn/Strobe

The Gentex GEC3-24WR is a 24 VDC combination fire alarm horn and strobe notification appliance designed to provide audible and visual evacuation signals in commercial and institutional fire protection systems. Part of the Gentex Commander3 Series, this red wall-mounted horn/strobe features five field-selectable strobe intensity settings of 15, 30, 60, 75, and 110 candela, allowing installers to configure visual notification output according to room dimensions, occupant needs, and applicable fire alarm design requirements. Identified by Gentex manufacturer part number 904-1317-002, the GEC3-24WR combines a high-intensity xenon strobe with an electronically controlled audible signaling device. Its low-profile enclosure measures 5 inches high, 4.5 inches wide, and 2.5 inches deep, making it suitable for indoor installation in offices, schools, healthcare facilities, retail buildings, corridors, and other occupied spaces requiring coordinated emergency notification.

The GEC3-24WR operates on nominal 24 VDC power with a UL-regulated operating voltage range of 16-33 VDC and supports compatible filtered DC or full-wave rectified notification appliance circuits. The strobe's published maximum operating current at regulated 24 VDC ranges from 42 mA at 15 candela to 161 mA at 110 candela, allowing fire alarm system designers to calculate notification circuit loading according to the selected intensity. The integrated horn provides four field-selectable audible tones: mechanical, 2400 Hz, chime, and whoop, with configurable high or low sound output. The mechanical, 2400 Hz, and chime tones support continuous or temporal-three alarm patterns, while the whoop tone uses its own signaling pattern. Manufacturer-published reverberant sound ratings range from 62 to 82 dBA at 10 feet, depending on tone and volume configuration, with a peak rating of 100 dBA at 10 feet in an anechoic environment. The selectable audible and visual settings allow the GEC3-24WR to accommodate different emergency notification requirements within compatible fire alarm systems.

The Gentex GEC3-24WR incorporates a Super-Slide mounting bracket that allows installers to prewire the notification circuit and verify supervision before attaching the horn/strobe assembly. The supplied die-cast metal mounting bracket supports installation on compatible single-gang, double-gang, and 4-inch square electrical boxes, while the optional Gentex GSB surface-mount box accommodates installations requiring an external enclosure. Its electrical terminals accept 12-18 AWG conductors, supporting supervised notification circuit wiring and convenient connection of incoming and outgoing conductors. The patented Checkmate Instant Voltage Verification feature provides access points for measuring voltage at the appliance without removing it from the mounting bracket, helping technicians evaluate circuit voltage drop during installation and inspection. A locking mechanism secures the appliance to the bracket with concealed hardware, while its tamper-resistant re-entrant grille protects the audible signaling assembly. The unit also supports horn and strobe synchronization using compatible Gentex AVSM control modules, including applications where the audible signal is silenced while the visual strobe continues operating.

The Gentex GEC3-24WR is designed for indoor fire alarm notification systems requiring synchronized audible evacuation signals and field-selectable visual strobe intensity. Its red housing and wall-mount configuration make it suitable for commercial buildings, educational facilities, healthcare occupancies, hotels, retail establishments, and institutional properties. The appliance operates in ambient temperatures from 32 F to 120 F (0 C to 49 C) and is intended for dry indoor locations rather than outdoor or weather-exposed installations. The Commander3 Series is ANSI/UL 464 Listed for audible signaling and ANSI/UL 1971 Listed for visible signaling, with applicable CAN/ULC S525 and S526 listings for 24 VDC models. The series also carries manufacturer-documented California State Fire Marshal approvals and supports installations designed in accordance with NFPA 72 and applicable building and fire codes. Unlike the GEC3-24WW, which features a white faceplate, the GEC3-24WR uses a red faceplate; the related GES3-24WR provides strobe-only notification without an integrated horn. Its combination of five selectable candela settings, four audible tones, adjustable sound output, Super-Slide installation technology, Checkmate voltage testing, and Gentex AVSM synchronization provides flexible notification capabilities for new fire alarm installations and compatible system upgrades. Gentex backs the Commander3 Series with a three-year manufacturer warranty from the date of purchase.



UPC: 700217023983
Also known as: GN-GEC324WR, GEC324WR

Technical Specifications:
  • Product Color: Red
  • Product Type: Horn
  • Number of Tones: 4
  • Alarm Type: Audible, Visual
  • Sound Emission: 100 dB
  • Application/Usage: Evacuation, Fire Protection System
  • Durability: Tamper Proof
  • Form Factor: Surface Mount, Wall Mountable
  • Certifications & Standards: UL 464UL 1971CAN/ULC S526-M87FMBS+A/MEABFPCSFMNFPA 72ADA
  • Limited Warranty: 3 Year
  • Input Voltage: 24 V DC
  • Product Line: Commander3
  • Product Functions: Alarm


For more information about the Gentex GEC3-24WR, please contact us.
  • GEH horn is available in 12VDC or 24VDC
  • Super-Slide® Bracket - Ease ofSupervisionTesting
  • Checkmate® - InstantVoltageVerification
  • Synchronize strobe and/or horn with GentexAVSM Control Module
  • Prewire entire system, install mounting bracket, then install signals
  • Documented lower installation and operating costs
  • Input terminals accept 12 to 18AWG
  • Switch selection for high or low dBA
  • Switch for chime, whoop, mechanical and 2400Hz tone
  • Tamperproof re-entrant style grill
  • 24VDC units have field selectable candela options of 15, 30, 60, 75 & 110
  • Nominal voltage 12VDC and 24VDC
  • Unit Dimensions: 5”(12.7 cm) high x 4.5”(11.43 cm) wide x 2.5”(6.35 cm) deep
  • Faceplate available in red or off-white
  • Silence audible while visual appliance will remain flashing (for use in accepted jurisdictions)
  • Surface mount with the GSB (Gentex Surface Mount Box)
  • Switch for continuous or temporal 3 tone (not available on whoop tone)

3 Reviews

  • 5
    GENTEX-GEC3-24WR

    Posted by 182537 on Mar 23rd 2022

  • 5
    GENTEX-GEC3-24WR

    Posted by 154203 on Mar 25th 2020

  • 5
    GENTEX-GEC3-24WR

    Posted by 106915 on Dec 21st 2016

Live Chat