The 400M series exit switch complies with national fire and building code requirements for manual releasing devices as specified for Access-Controlled Egress Doors.

This narrow frame mount exit switch assembly includes a large push button on a narrow frame mount plate with push switch signage "PUSH TO EXIT".

This Exit Switch includes a 2" square button on a 1-Gang wall mount plate with code compliant push switch signage "PUSH TO EXIT".

The SDC 430 Heavy Duty Industrial Series incorporates a 1 1/2'' round mushroom button with heavy duty contacts. The assembly is capable of withstanding high impact and is ideal for heavy duty high frequency use.

The conspicuous 440 Heavy Duty Industrial series switch assemblies incorporate a 2.625" inch diameter mushroom button and heavy-duty water resistant contacts.

The SDC 450 Series incorporates a 0.25" thick aluminum faceplate and a stainless steel button. The assembly will resist the impact of a hammer blow.

The single gang 463 series vandal resistant request-to-exit switch is made of stainless steel and billion-cycle piezoelectric push switch technology.

IR Sensor, 5” read range, Wave to Exit Dual LED, illuminated status indication. Control electric locks/strikes, magnetic locks, or automatic door operators.

Alternative to wall mounted access control or switches for entry doors. Bollard post provide visibility and meet accessibility guidelines. Practical solution for surface mount or in-ground installation.

Vandal resistant single gang key switches feature a 1/4" stainless steel faceplate with key cylinder recess and security screws and anti-tamper plugs.

Narrow frame mount assemblies featuring a 20 gauge stainless steel faceplate with security spanner screws for tamper resistance.

Double gang wall mount key switch assemblies feature a 20 gauge stainless steel faceplate with security spanner screws for tamper resistance.

Vandal resistant narrow key switch for 1-3/4" frames. Features include a 1/4" stainless steel faceplate with key cylinder recess and security screws and anti-tamper plugs.

Vandal resistant single gang key switches feature a 1/4" stainless steel faceplate with key cylinder recess and security screws and anti-tamper plugs.

For a common single bathroom shared by two patient rooms or dormitory rooms, these controls provide privacy when occupied while ensuring that both doors are unlocked when unoccupied.