Home > Visonic > PowerCode Products > Accessories > Safety Detectors >

Visonic MCT550 Supervised Wireless PowerCode Flood Detector
MCT550 Visonic | JMAC Supply
 

Our Price: $85.44



Product Code: VISONIC-MCT550
Qty:

Description Product Resources
 

Visonic MCT550 Supervised Wireless PowerCode Flood Detector


  • Also known as: VS-MCT550

    • The Visonic MCT-550 is a fully supervised wireless flood detector compatible with PowerMax and other Visonic PowerCode wireless security systems. It is designed to detect the presence of water in basements, yachts and many others residential and commercial applications, providing early warning of developing floods.

    In default mode, the MCT-550 transmits each flood alert message a single time. However, users may program the detector to repeat the alert every three minutes until the device is reset. To ensure secure communication, transmissions use a PowerCode 24-bit ID command code, which is selected from 16 million possible combinations and is therefore unique and virtually impossible to accidentally reproduce. A smart anti-collision algorithm prevents signal jamming by simultaneous transmissions from multiple devices.

    The MCT-550 transmits supervisory reports, including battery condition, to the wireless control panel or receiver at regular intervals ensuring system integrity and functionality at all times.

    The easily installed MCT-550 wireless flood detector is available in various frequency bands according to international standards, and is approved for use in most countries.    		Features:
    • Detects water at ground level
    • Ideal for basements, yachts and holiday houses
    • Easy installation: includes a 3m (10ft) sensor cable for high positioning of
    • the transmitter
    • Fully supervised
    • Over 16 million possible code combinations
    • Smart anti-collision algorithm supports multiple simultaneous transmissions
    • 3 Volt standard Lithium battery
    • Compatible with PowerMax and other Visonic PowerCode wireless systems
    • Approved and available in various frequency bands according to international standards


    Technical Specifications:
    • Compatibility: Compatible with PowerMax and PowerMax+ alarm systems, MCR-308 receiver or any other PowerCode alarm system
    • Frequency (MHz): 315, 433.92, 868.95, 869.2625 or other frequencies according to local requirements
    • Transmitter's ID Code: 24-bit digital word, over 16 million combinations, pulse width modulation
    • Overall Message Length: 36 bits
    • Message Repetition: One-shot transmission (default) or once every 3 minutes (selectable)
    • Supervision: Signaling at 60-minute intervals (U.S. version) or 15 minute interval (UK version), or according to the local standards
    • Response to Tamper Event: Tamper report every 3 minutes (until the tamper switch is restored)
    • Power Source: 3V Lithium battery, Panasonic type CR-2 or equivalent
    • Nominal Battery Capacity: 750 mAh
    • Current Drain: 6A STBY, 17mA average in operation (including LED)
    • Battery Life with LED on: 3 years (for typical use)
    • Battery Supervision: Automatic reporting of battery condition data as part of any transmission
    • Length of Flood Sensor Cable: 3 meters (10 ft)
    • Weight of Flood Sensor Cable: Approx. 60 gr
    • Operating Temperature: 0C to 49C (32F to 120F)
    • Dimensions: 81 x 22 x 23.5 mm (3-3/16 x 7/8 x 15/16 in.)
    • Weight (including battery): 45 g (1.6 oz)
    • Standards: Meets FCC Part 15, MPT1349 and Directive 1999/5/EC


    UPC: 780245000019

    Average rating: 5.0, based on 2 reviews


    For more information about the Visonic MCT550, please contact us.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Visonic > PowerCode Products > Accessories > Safety Detectors
    Visonic
    Visonic > PowerCode Products
    Visonic > PowerCode Products > Accessories