Takex PA8420E Passive Infrared Sensor

• Unique high-density detection area
• Mirror optics ensure reliable protection from 4-8m (13-26ft) high ceilings
• Suitable for both indoor and outdoor use
• Insect/weather resistant seals
• Photo MOSFET relay for silent operation
• AES resin housing for high impact resistance; suitable for sports halls and similar environments
• High Performance: Up to 20m (66ft) Vertical Curtain @ H4-8m

• Coverage: Vertical curtain: 20m (66ft) max.
• Sensitive zone: 30 zones (60 beams)
• Coverage adjustment: Vertical: 24 degrees, Horizontal: 15 degrees
• Mounting position: Indoor or outdoor ceiling
• Installation height: 4-8m (13-26ft)
• Supply voltage: 9 to 30VDC (non-polarity)
• Current consumption: 30mA max.
• Alarm output: Dry contact (semi-conductor) output (NC/NO), 24V (AC/DC) 0.25A (resistive load) (protective resistor 3.3), Warm up: approx. 1 min. (no alarm condition), One-shot output at detection (approx. 2sec.), Continuously output when detecting functional troubles, Continuously output when detecting low supply voltage
• Tamper output: Dry contact output: (NC), 30V (AC/DC) 0.1A (resistive load), Tamper output: real time output
• Alarm LED: Red LED, Blinks during warm-up (approx. 1 min), One shot lights (approx. 2 secs) at detection, Continuously lights when detecting functional troubles, Continuously lights when detecting low supply voltage
• Functions: Trouble alarm, Low supply voltage alarm, Tamper signal, LED control (L/C), Area control (A/C), Alarm LED (ON/OFF), Sensitivity adjustable for 60/80/100/120%, Pulse count selectable for 1/2/3/4
• Ambient temperature: -20C to +50C (+4F to +122F)
• Wiring: Terminals
• Weight: 950g (33.25oz)
• Appearance: Body: ABS resin, Cover: PE resin
• Accessory: Waterproof grommet: 1pc, Tapping screw: 2pcs