Home > Takex > Security Sensors > Indoor PIR > Ceiling Mount >

Takex PA6612E Passive Infrared Sensor
PA-6612E Takex | JMAC Supply
 

Our Price: $114.00



Product Code: TAKEX-PA6612E
Qty:

Description Product Resources
 

Takex PA6612E Passive Infrared Sensor


  • Also known as: PA6612E, PU-PA6612E

    • The PA-6612 is a novel approach to the issue of false alarms and pet tolerance in PIR motion detectors. Through the use of Twin Dual-Element mirror optic detectors, Takex has created a ceiling mount detector with no equal in the security industry.

    The PA-6612 uses non-linear mirror adjustment technology, ensuring maximum performance over a given area on ceilings up to 4.0m. The secret to the amazing performance of the PA-6612 is in the way that the mirrors are adjusted in reference to each other. It is non-linear, meaning that as the detectors mounting height increases, the angle of separation of each lens decreases, thereby maintaining a steady aspect ratio.

    Contrary to popular belief, it is not acceptable to fit a wall mount detector on a ceiling bracket above its recommended mounting height, and then adjust it to look down. This will cause each layer of fingers to separate creating a virtual dead zone that will not detect movement. Twin PIRs are not new but Twin-Mirror-Non-Linear PIRs are. With rock solid performance, the PA-6612 offers installers the opportunity to virtually eliminate false alarms from the toughest of environments.    		Features:
    • Unique twin mirror and two twin pyro optics for high discriminating capability
    • Accurately detects human intrusion whilst rejecting nuisance alarms from small animals
    • Geared mirror array ensures maximum performance regardless of mounting height up to 4m
    • Detachable base unit with snap-in/out sensor design for easy installation
    • Photo MOSFET relay for silent operation
    • High RFI and EMI immunity


    Technical Specifications:
    • Detection system: Passive infrared
    • Coverage: Wide angle: 12m (40ft) max.
    • Sensitive zone: 17 pairs (64)
    • Supply voltage: 10.5 to 18VDC (non-polarity)
    • Current consumption: 25mA max.
    • Alarm signal: Dry contact (NO/NC selectable), Reset: approx. 2 sec, 24V, 0.25A max., (Protective resistor 3.3)
    • Alarm memory: Auto: 3 mins. flashing, 47 mins lighting, Manual: manual control
    • Alarm LED: Red: blinking at warm-up, Lighting at alarm (LED disabled)
    • Memory LED: Yellow: blinking at memory activated, lighting at memory indication
    • Adjustment: Vertically: 19.5 degrees, Horizontally: 25 degrees
    • Count changeover: 1/2/3/4 changeover
    • Ambient temperature: -15C to +55C (+5F to +131F)
    • Mounting position: Indoor ceiling (wall mount with optional BCW-401)
    • Wiring connection: Terminals on separate base unit
    • Weight: 135g (4.7oz)
    • Appearance: Body: ABS resin, Cover: PE resin
    • Accessory: Tapping screw: 2pcs, Sensor locking screw: 1pc


    UPC: 100000900772

    Average rating: 5.0, based on 2 reviews


    For more information about the Takex PA-6612E, please contact us.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Takex > Security Sensors > Indoor PIR > Ceiling Mount
    Takex
    Takex > Security Sensors
    Takex > Security Sensors > Indoor PIR