Takex PA460 Passive Infrared Sensor

• 4bit microprocessor
• Creep zone focused directly below sensor eliminates dead area beneath unit
• Coverage pattern can be adjusted for different mounting heights
• Equipped with Tamper, Auto-reset memory
• Photo MOSFET relay for silent operation
• Wall Mount: 16.5m (55ft) Vertical Curtain

• Detection system: Passive infrared
• Coverage: Vertical curtain: 16.5m (55ft) max.
• Sensitive zone: 6 pairs
• Supply voltage: 9 to 18VDC (non-polarity)
• Current consumption: 25mA max.
• Alarm output: Dry contact (semi-conductor) (NO/NC selectable), Reset: approx. 2 sec, 24V, 0.25A max., (Protective resistor 3.3)
• Tamper output: 0.1A, 30V (NC)
• Alarm LED (Red): Blinking at warm-up - Lighting at alarm (LED disabled), Blinking at memory activated - Lighting at memory indication
• Coverage adjustment: Vertically 3 steps
• Pulse count: 2
• Alarm memory: 3 mins blinking, 47 mins lighting (automatically reset)
• Low voltage notice: Dry contact alarm
• Ambient temperature: -15C to +55C (+5F to +131F) without condensation
• Mounting position: Indoor use only (ceiling mount with optional BCW-401)
• Weight: 120g (4.2oz)
• Appearance: Body: ABS resin, Lens: PE resin