Seco-Larm E-931CS22RFCQ ENFORCER Wireless Entry Alert System

• For monitoring a driveway or use as an entrance indicator.
• No wiring required between the sensor and speaker; when tripped, the sensor wirelessly transmits to any programmed speaker.
• Weatherproof IR photoelectric beam sensor for outdoor use.
• Speaker makes "ding-dong" or siren sound if beam is interrupted.
• Speaker volume can be adjusted or turned off.
• When in siren mode, sounding time is adjustable from 3~30 seconds.
• Connect additional speakers to the sensor wirelessly (one speaker included).
• Includes the following: Weatherproof wireless reflective sensor (Tx), Wireless speaker (Rx), Reflector, Two power adapters and Three mounting brackets: One each for the sensor, reflector, and speaker

• Sensing range: Up to 22ft (7m)
• Wireless range: Up to 328ft (100m)
• RF Frequency: 433.92 MHz
• Operating voltage: Sensor - 12VDC (adapter included), Speaker - 12VDC (adapter included)
• Active current draw: Sensor - 20mA, Speaker - 100mA
• Standby current draw: Sensor - 5mA, Speaker - 25mA
• Light source: IR LED
• Operating temperature: 32~122 F (0~50 C)
• Speaker volume: 0~90 dB
• Alarm time range: 3~30 s (Adjustable)
• Speaker output: Chime / Off / Alarm (selectable)
• Dimensions: Sensor - 3-1/4" x 2-9/16" x 1-7/16" (82x65x37mm), Speaker - 3-1/4" x 2-15/16" x 1-3/8" (83x75x35mm), Reflector - 2-3/8" x 2-1/16" x 3/8" (60x52x9mm)