Potter / Amseco PCS-300-1B 1/2 HP SWITCH BRASS Also known as: PCS3001B, PL-PCS3001B Potter / Amseco PCS-300-1B 1/2 HP SWITCH, BRASS
Pump Control Switch, Model PCS, featuring independent set and reset points that are programmable over the switch's complete operating range. Any location within the switch's operational range will yield the minimal Deadband (minimum spread between set and reset points). A snap action switch closes, activating the built-in pump control relay and turning on the pump when the pressure falls below the preset level. The snap action switch opens when the pressure rises above the high setting, deactivating the built-in pump control relay and turning the pump off. The pressure connection, diaphragm, or nitrile pressure-sealing o-ring are not damaged by the employment of this control device as an operating control in applications sensing air, water, or other fluids. It is the installer's obligation to implement safeguards (safety, limit controls) that prevent harm to people or damage to property, or systems (alarm, supervisory systems) that alert people to control failure. This gadget is not meant to be used with hazardous fluids or in explosive settings. |
Features:
- Adjustable Operating Range - 25-300 PSIG
- Minimum Deadband - 12 PSIG
- Proof Pressure - 400 PSIG
- Factory Settings - 90/60 PSIG
- UL Listed, CSA Approved, and CE Marked
- Listing/Approvals:
- UL Standard 508 Guide (NKPZ) and CSA Standard C22.2 No. 14-M Class (321106) for Pressure Operated Industrial Control Equipment.
- UL Standard 873 Guide (XAPX) for Temperature Indicating and Regulating Equipment.
- CE Marked
- Ambient/Media Temperature Range:
- 40°F to 140°F (4.5°C to 60°C)
- Construction:
- NEMA Type 4X Enclosure for indoor or outdoor use. (To maintain 4X rating, use appropriate Type 4 conduit hub.)
- Forged Brass Pressure Connections
- Aluminum Diecast Base with Polymer Enclosure
- Beryllium Copper
- Nitrile Pressure Sealing O-ring
- Switch Contact:
- 15 Amps @125 VAC Resitive
- 1/2 HP @ 125 VAC
|