Edwards Signaling 879DEX-G1 Hazardous Location AdaptaHorn, 24VDC, 0.16A AdaptaHorn Grille Type Hazardous Location Horn Diode Polarized Also known as: 879DEXG1, ED-879DEXG1 The Edwards 878DEX, 879DEX, 888D and 889D Series are diode polarized, heavy-duty, high decibel, vibrating horn signals. They are intended for use in hazardous locations requiring electrical supervision of signaling circuit field wiring. For non-fire alarm applications, horns have a NEMA type 4X rating and may be used outdoors (recommended above temperatures of +25F).
Two mounting brackets are provided on either side of the unit for wall mounting. The housing is tapped on one side for 3/4" (19mm) conduit to allow for field wiring installation.
For use in dusty, hazardous atmospheres where a distinctive, urgent signal is required. Typical applications include use in mines, petroleum plants, gas plants, grain elevators, flour mills, paper mills, textile plants and tankers. |
Features:
- Diode polarized
- 24VDC operating voltage
- 0.16A current
- Corrosion resistant heat flowed epoxy finish
- Low current drain
- Operating voltage range -20% to +10% of nominal voltage
- Power connection wires embedded in sealing compound
- Not recommended for temperatures below 25F (-3.9C)
- NEMA Type 4X rated
- UL listed for Class I, Div. 1 and 2, Groups B, C and D; Class II, Div. 1 and 2, Groups E, F and G; and Class III locations
|