 |
 |
 |
|
American Fibertek MX2-MM-LX-ST Gigabit Fiber Optic Data Transceiver Module, LX, ST Connectors, Multimode
Also known as: MX2MMLXST, AZ-MX2MMLXST
American Fibertek's V'nes MX Media Convertor series enable network managers to connect 10/100 Fast Ethernet or 1000 Mbps Gig E twisted pair to fiber optic cabling for wide bandwidth cost effective short or long distance transmission. Multiple port design reduces installation and cable allowing for multiple inputs to run on a single path. The Media Convertor MX series provides optional single fiber WDM technology combining dual fiber cable into single cable for greater cost savings. Front panel LEDs provide easy status checking along with Link Fault Pass Through and MDI/MDI-X for easy installation. When combined with Commander series switch products, the MX provides easy, and cost effective solutions to convert any number of ports from twisted pair to fiber. The MX product line is available as standard alone modules that can also be directly inserted into a modular rack and SR-20 compatible rack modular cards. |
Features:
- Distances up to 2km
- Comply with 10BaseT and 802.3u 100Base-T, FX standard
- Store and forward switching mechanism
- Auto-Negotiation
- MDI/MDIX Auto-Crossover supported
- LED Indication (FX Link , Link/Act1, SPD1, Link/Act2, SPD2,Power)
|
Technical Specifications:
- Standards: IEEE: 802.3 802.3ab, 1000 BaseT, 802.3z 1000BaseT
- Data Port: 2 x 10/100Mbps RJ45, 1 x 10/100Mbps Dual Fiber SC auto configuration, auto negotiation
- Fiber/optical connector: Dual fiber ST
- Switching mechanism: Store & forward switching mechanism
- Wavelength: 1310nm
- Ethernet data rate: Full Duplex: 2000Mbps, Half Duplex: 1000Mbps
- UTP: Cat. 5 UTP Cable
- Fiber cable: 50/125, 62.5/125(multimode) 9/125 (single-mode)
- Maximum distance: 100 m (1000Base-T UTP Cat. 3/4/5 cable,RJ-45 connector), 500m (100Base-FX Multi-mode fiber (1000Base-LX SC connecter), 30 Km(100Base-FX Singlemode fiber (1000Base-LX) SC connecter)
- MAC Table: 2K
- Forward and Filter Rate (64 Bytes): 1,488,100pps(1000Base-T)
- LED Actions: FX Link-red , blinking when data active, Link/Act-red, blinking when data active SPD-10Mbps/not lit, 100Mbps/green Power- red
- Power: DC 5V, 0.8A MaxWeight: 0.3kg, (0.7pds)
- Dimensions: 102mm (4) X 122mm (4.8)X 26mm (1) (DxWxH)
- Temperature Operating: -20C ~ +55C (-4F ~+131F)
- Humidity: 0%~95%RH, non-condensing
- Certifications: RoHS, FCC: Part 15 Class A CE: EN55022 Class A, EN55024
|
UPC: 999999447037
Average rating: 4.5, based on
2 reviews
For more information about the American Fibertek MX2-MM-LX-ST, please contact us.
|
|
|
 |
|
 |
|
