Adams Rite 7100-440-628-00 Door Electric Strike, Flat, Standard/Fail Secure, 16 Volt AC, Clear Anodized, With 4-7/8" Flat Faceplate, For Aluminum Door, Series Electric Strikes for Adams Rite Deadlatches and Cylindrical Locks
Also known as: 710044062800, R8-710044062
Adams Rite 7100-440-628-00 ELECTRIC STRIKE
Designed for use with Adams Rite deadlatches or cylindrical locksets with latchbolt projections ranging from 1/2" [12.7 mm] to 5/8" [15.9 mm]. for use in applications involving wood, hollow metal, or aluminum.
Function: Remote electrical control of any door fitted with an Adams Rite Deadlatch 4500, 4700 (discontinued), or 4900, or a cylindrical lockset with a latchbolt projection of 1/2" [12.7 mm] to 5/8" [15.9 mm]. In order to open the door without using the latch itself, electrical activation unlocks the keeper and releases the latchbolt.
Certifications: Listed to UL 294 (6th Edition) and UL 1034 for burglary resistance
Case measures 1" by 3-3/8" by 1-5/8" deep (25.4 mm by 85.7 mm by 41.3 mm).
Strike Opening: 15.9 mm x 36.5 mm x 12.7 mm deep, or 5/8" x 1-7/16" x 1/2". Stainless steel serves as the bolt retainer keeper. Any cylindrical latch or deadlatch from the Adams Rite 4500, 4700 (discontinued), or 4900 series can be used with the strike.
Basic strike has a lip that is the right length for a door that is 1-3/4" [44.5 mm] thick and shuts flush with the jamb edge. There are lip extension kits available, identified by the last dash number, if door thickness or jamb form deviates from this typical relationship.
Kits for lip extensions are not offered on the 7101 or 7131.
1/2" to 5/8" [12.7 mm to 15.9 mm] Latchbolt Projection
Faceplate: A range of architectural treatments are available.
In order to conceal the strike aperture while switching from an MS pivoted-bolt deadlock to a deadlatch, the 7130/7131 large 6-7/8" faceplate is designed.
Individually packed with mounting screws, mounting clips, and adhesive shims to suit jamb or stile extrusion thickness higher or less than nominal 1/8" [3.2 mm] are the standard packaging.
7140 comes with mounting clips and adhesive shims to use in place of missing welded tabs.
Weight for Shipping: 2 lbs. (0.91 kg).
Electrical current requirements are 0.33 A at 12 VDC and 1.42 A at 12 VAC.
16 VDC at 0.22 A, 16 VAC at 0.63 A
24 VDC: 0.17 A; 24 VAC: 0.74 A
Voltage: 12, 16, or 24 Volts AC and DC are available. AC intermittent units "buzz" when operating, while DC continuous ones are silent.
Field selection for Fail Safe | Fail Secure is available during installation. However, neither situation should require constant use of an AC intermittent solenoid.
Available with two Form 'C' monitoring switches to show whether the strike jaw is blocked and whether the latchbolt is engaged in the strike. Inaccessible on the 7130, 7131, and 7140.
Lip extension kits, only for flat faceplates, for varying door centerline to jamb edge dimensions. No longer accessible on 7101 or 7131.
Modular Packaging: To create an entire electric strike, combine a strike body kit with a strike faceplate kit. All the hardware needed to mount an electric strike is included in faceplate kits. For information, please speak with a sales representative or the factory. |
