United Security AD2000 Automatic Voice/Pager Dialer

  • MPN: AD2000
  • JMAC ID: 200014944
$384.30
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200014944
df_manual_boost:
2.20

The United Security Products AD-2000 is a four-channel automatic voice and pager alarm dialer that calls up to eight programmed telephone numbers when an alarm or monitored condition is triggered. Designed for security systems, equipment monitoring, and emergency notifications, it supports four separate prerecorded voice messages with up to 51 seconds of total recording time, two-way listen-in verification, and built-in telephone line seizure. Operating from 9-18 VDC, the dialer features normally open, normally closed, and voltage-triggered inputs, an LCD programming interface, and EEPROM memory that retains settings during power interruptions.

United Security Products AD-2000 Four-Channel Automatic Voice and Pager Alarm Dialer

The United Security Products AD-2000 is a four-channel automatic voice and pager dialer designed to provide telephone-based alarm notification for residential, commercial, and industrial monitoring applications. Manufactured by United Security Products (USP), the AD-2000 automatically contacts designated recipients when an alarm panel, security sensor, or compatible monitoring device activates one of its four independently programmable input channels. The dialer can store up to eight telephone or pager numbers, allowing notifications to be delivered to designated personnel, property owners, maintenance technicians, or other authorized contacts. Its four-channel configuration supports separate alarm conditions, such as intrusion detection, equipment malfunction, environmental warnings, and temperature monitoring. The AD-2000 operates through a compatible analog telephone connection and can function as an accessory to an existing alarm system or as a standalone notification controller when connected to appropriate sensors, telephone service, and an external power source.

The AD-2000 incorporates four independently programmable alarm channels and up to 51 seconds of digital voice message recording capacity. Each channel can be assigned an individual outgoing message that identifies the activated condition and provides instructions to the person receiving the call. The unit supports up to four separate outgoing messages, with an optional identification message of up to 15 seconds, allowing users to announce the monitored location before delivering the specific alarm information. Recording time is distributed among the selected messages according to the programmed configuration. The dialer features busy-line and no-answer detection, one to nine programmable dialing attempts, and one to three message repetitions per call to support flexible notification sequences. Its built-in telephone line seizure function allows the device to obtain priority access to a properly wired telephone line during alarm activation. An integrated listen-in verification and two-way communication feature provides additional information about conditions at the monitored location, while remote channel termination allows an authorized recipient to stop an activated notification sequence according to the programmed settings.

The United Security Products AD-2000 supports normally open (NO), normally closed (NC), and voltage-activated alarm inputs, providing compatibility with different types of monitoring equipment. Normally open contacts can activate the dialer when they close, while normally closed contacts can initiate notification when the monitored circuit opens. Voltage-triggered operation supports compatible alarm outputs, and each channel can be programmed for momentary or continuous activation with selectable entry and exit delay settings. The unit operates from a 9-18 VDC power source, drawing approximately 28 mA in standby and up to 100 mA during dialing. Its front-panel LCD display and covered programming keypad provide guided setup for telephone numbers, recorded messages, input-channel behavior, and calling sequences. The dialer also includes a built-in auxiliary output for operating a compatible external siren, strobe, or relay interface. Nonvolatile EEPROM memory preserves programmed telephone numbers, messages, and system settings when operating power is interrupted. Optional accessories include the USP AC-1 power adapter, AC-2 12VDC adapter, PP-1 rechargeable backup power pack, and IR-1 isolation relay, allowing installers to adapt the dialer to different monitoring configurations.

The AD-2000 features a compact white ABS plastic enclosure measuring 6 inches wide, 4 inches high, and 1.5 inches deep, designed for mounting on a wall or other suitable flat interior surface. The manufacturer specifies an operating temperature range of 0 F to 130 F (-18 C to 55 C), supporting installation in appropriate protected equipment rooms, offices, control areas, and utility spaces. The standard package includes one AD-2000 dialer, one telephone cable, one instruction manual, and four 1,000-ohm resistors. The primary power adapter and optional battery backup equipment are sold separately. For applications requiring independent event notification, the dialer can interface with compatible temperature switches, water-level sensors, power-loss detection devices, emergency buttons, magnetic contacts, and other suitable dry-contact or voltage-output devices. Its analog telephone interface supports tone or pulse dialing and programmable PBX access digits, providing flexibility for supported conventional telephone installations. The AD-2000 is not a cellular or IP communicator and does not independently provide central-station alarm reporting using modern digital communicator protocols. Its integration into fire alarm, intrusion, or emergency notification systems must follow the applicable equipment requirements and local regulations. With four alarm inputs, eight programmable destinations, customizable voice messages, two-way verification, automatic redialing, and EEPROM program retention, the United Security Products AD-2000 provides a telephone-based alarm notification solution for compatible security and equipment monitoring applications.



UPC: 749617043177
Also known as: US-AD2000

Technical Specifications:
  • Color: White
  • Case Material: ABS
  • Weight: 12.25 oz
  • Dimensions: 6 x 4 x 1.5in
  • Max. Digits for outgoing numbers: 50
  • Current: OPERATE mode - standby 28mA typical; dialing 100mA max.
  • Power source: 9-18VDC


For more information about the United Security Products AD2000, please contact us.
  • Universal Dial Tone. Works with any analog phone system
  • Built-In Auxiliary Output to drive external siren, strobe or relay
  • Wall of flat surface mounting
  • NOTE: Power Supply Sold Separately
  • Listen-In verification and 2 way communication
  • Automatically Calls up to 8 telephones or cell phones
  • A Full Featured Security System with 4 Independent Voice Message Dialer Channels
  • 4 Separate Outgoing Messages
  • Built-in Line Seizure
  • EEPROM Memory retains program despite power loss
  • Remote reset feature allows termination of activated channel

2 Reviews

  • 5
    UNITED-SECURITY-AD2000

    Posted by 159430 on Aug 7th 2020

  • 5
    UNITED-SECURITY-AD2000

    Posted by 71476 on Jun 23rd 2014

Live Chat