 |
 |
 |
|
Seco-Larm E-961-S90WQ ENFORCER Single Photoelectric Beam Sensor, 90ft (30m) Range
Also known as: E961S90WQ, SL-E961S90W
The Seco-Larm E-961-S90WQ protects large indoor and outdoor openings while allowing easy egress from areas outfitted with access control equipment. When used as part of an alarm system, it can detect vehicles moving along a driveway or entering a factory.
For areas of controlled access, such as a gated community or parking lot, the E-961-S90W allows a person or vehicle to open a gate without the use of codes or unlocking devices. |
Features:
- 90Ft (30m) sensing distance for protecting large openings or wide roadways.
- Weather-proof to IP66 standards for indoor and outdoor use.
- Mounts flat or at a 90-degree angle to the wall with no need for extra brackets.
- Adjustable lens angle.
- Transmitter power can be adjusted to match local environment.
- 1A relay output (NO/NC/COM).
- AC/DC 10~24V operation, non-polarity connection.
- Internal terminal block for easy wiring.
- Mounting screws included.
|
Technical Specifications:
- Type: NIR Single Beam Sensor
- Sensing Range: 90' (30m)
- Supply Voltage: AC/DC, 10~24V
- Current consumption: 33.5mA (Tx), 27.5mA (beam aligned), 13mA (beam broken) (Rx)
- Response Time: 100ms (Max)
- Emitting element: IR LED
- Operation indicator: Red LED on for standby (TX), Green LED show power (RX)
- Relay: 1A, 120VAC, NO/NC/COM
- Transmitter adjust: Long vs. short distance
- Sensing angle adjust: Horizontal +/-5, vertical +/-5
- Illumination: Lamplight <10,000-lux sunlight <30,000-lux
- Noise resistance: 1,500Vp-p/1us
- Surge resistance: 2KV/1us
- Vibration resistance: 10~55 Hz/1.5mm, 2 hours in X.Y.Z. phase
- Weatherproof: IP66 standard
- Safety: CE standard
- Material: Case - nylon, lens - polycarbonate
- Ambient Temp: -13~140 F (-25~60 C)
|
UPC: 676544012412
Average rating: 5.0, based on
2 reviews
For more information about the Seco-Larm E-961-S90WQ, please contact us.
|
|
|
 |
|
 |
|
