Dynalock 2511-US10B Mini-Mag Electromagnetic Lock, Single Outswinging Door, Single Coil, 650lbs, Oil Rubbed Bronze
Also known as: DY-2511US10B
The Dynalock 2511-US10B is a 650 lb holding force mini maglock for a single outswinging door. The lock has an oil rubbed bronze finish.
The 2511-US10B is comprised of 3 basic components: a lock housing, an electromagnetic coil, and an armature. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The 2511-US10B is ideal for interior office doors, clean room interlocks, tool cribs, and x-ray areas. |
Features:
- Single outswinging door
- Single coil
- Mounts to the underside of the frame header
- Oil rubbed bronze finish
- Holding Force - 650 lbs. holding force provides for effective traffic control. Examples include interior office doors, clean room interlocks, tool cribs, and x-ray areas.
- 4 Operating Voltages - 12 or 24 VDC or VAC for installation flexibility and to reduce stock.
- Low Power Consumption conserves energy, reduces operating cost, and extends battery backup time.
- A Totally Plated Coil and armature provides protection against corrosion.
- No Residual Magnetism - The lock releases without delay when de-energized.
- Narrow Backset - A thin lock section (1-1/4) may mean the elimination of additional mounting brackets.
- Built-In Spike Suppression protects other solid state components within the system from damage when the lock is de-energized.
|
