CDVI GWE ENGAGE Gateway with IP and RS-485 Communication

  • MPN: GWE
  • JMAC ID: 200609760
$610.00
Limited Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200609760
df_manual_boost:
1.75

The CDVI GWE is an ENGAGE wireless gateway designed to connect Schlage electronic locks with compatible networked access control systems. Supporting up to 10 ENGAGE-enabled devices, encrypted 2.4 GHz Bluetooth 4.0 communication, and Ethernet (PoE) or RS-485 connectivity, the gateway enables centralized lock management and real-time status monitoring. Its AES-256 wireless encryption, 12/24VDC power options, and compact 5.1" x 6.0" x 1.2" housing support commercial access control installations using compatible CDVI ATRIUM controllers and Schlage wireless locks.

CDVI GWE ENGAGE Wireless Gateway with Ethernet PoE and RS-485 Communication

The CDVI GWE ENGAGE Wireless Gateway provides network connectivity for Schlage ENGAGE-enabled electronic locks in commercial offices, multifamily properties, educational buildings, healthcare facilities, and institutional access control installations. Distributed by CDVI for integration with compatible ATRIUM access control systems, the GWE connects wireless locking devices to an access control panel or IP-based management platform. Each gateway supports up to 10 ENGAGE-enabled devices, including compatible Schlage NDE and LE wireless locks, allowing facility administrators to manage electronic access across offices, residential units, conference rooms, and restricted storage areas. The gateway communicates with connected locks through AES-256-bit encrypted 2.4 GHz Bluetooth 4.0 technology, providing protected wireless data transmission without requiring dedicated communication wiring to every door. Its Ethernet and RS-485 interfaces support integration with compatible physical access control systems, enabling centralized credential management, lock operation, and door status monitoring. The GWE functions as a communication gateway rather than an independent door controller and requires supported access control hardware and software for complete system operation.

The CDVI GWE features an integrated Ethernet port supporting Power over Ethernet (PoE) and an RS-485 serial communication interface, allowing integration with compatible IP-based access control hosts or CDVI ATRIUM controllers. Its wireless interface operates using Bluetooth 4.0 at 2.4 GHz with 40 dynamically selected communication channels and supports data transmission rates up to 1 Mbps. The Ethernet interface supports network speeds up to 100 Mbps, while the RS-485 connection operates at 9.6 kbps. The gateway can receive power through IEEE 802.3af/at-compliant PoE or a 12VDC/24VDC external power connection, with operating current requirements of approximately 330 mA at 12VDC, 100 mA at 24VDC, or 60 mA when powered through PoE. Its compact white enclosure measures 5.1 inches high x 6.0 inches wide x 1.2 inches deep (130 x 153 x 30.4 mm) and weighs approximately 8.6 ounces (240 g). Designed for indoor applications, the GWE operates within a temperature range of 32 F to 120 F (0 C to 49 C) and supports non-condensing humidity conditions. The gateway carries UL 294, FCC Part 15, Industry Canada, and RoHS compliance certifications documented in the manufacturer's product literature.

The CDVI GWE enables real-time communication between compatible access control systems and ENGAGE wireless locking devices, supporting remote lock, unlock, and lockdown commands through a connected controller or IP host. The manufacturer specifies command execution in less than 5 seconds under supported operating conditions, while credential verification can occur in less than 1 second depending on the connected access control platform. Encrypted communication uses AES-256 between the gateway and wireless locks, TLS 1.2 or newer for compatible IP host connections, and optional AES-128 encryption for supported RS-485 control panel communication. The gateway supports monitoring of compatible device information, including door position, lock status, credential activity, request-to-exit events, communication loss, and low-battery conditions. Additional configurable functions include relock parameters, extended unlock periods, door-held-open pre-alarms, credential format conversion, and reader configuration, depending on the connected locking device and management system. For CDVI ATRIUM applications, the GWE integrates with the ADH10 door handle controller through its RS-485 communication bus, allowing the controller to manage compatible Schlage wireless locks. The CDVI ADH10 supports up to 10 connected GWE gateways and manages up to 10 wireless door handles across the controller configuration. The original GWE supports up to 10 wireless devices, distinguishing it from the newer GWE2 gateway, which supports up to five devices and requires separate compatibility verification.

Installation of the CDVI GWE ENGAGE Gateway supports wall mounting, desktop placement, or attachment to compatible single-gang and double-gang plastic electrical boxes using the supplied mounting plate. The gateway features externally accessible Ethernet, RS-485, DC power, and antenna connections, allowing installers to establish network communication without opening the main enclosure. For wired controller integration, the manufacturer supports 24 AWG shielded two- or four-conductor RS-485 cable runs up to 4,000 feet (1,219 meters), while Ethernet connections support cable runs up to 328 feet (100 meters). Wireless communication generally reaches up to 30 feet in typical building environments, with up to 50 feet possible under ideal line-of-sight conditions; actual performance depends on building materials, metal barriers, equipment placement, and radio-frequency interference. The manufacturer recommends mounting the gateway with its antenna vertically oriented and maintaining at least 1 inch of separation from metal surfaces. Commissioning is performed through the Allegion ENGAGE mobile application, where installers register the gateway, select the appropriate IP or RS-485 operating mode, and link compatible wireless locks to the designated system. CDVI ATRIUM integration requires a supported ADH10 controller, appropriate firmware, and compatible ENGAGE lock configurations. The gateway must be installed indoors, connected using only one approved power source at a time, and commissioned according to the applicable Schlage ENGAGE and CDVI ATRIUM installation instructions.



UPC: 301000000237


Technical Specifications:
  • Application/Usage: Conference Room, Office
  • Product Type: Network Gateway Module


For more information about the CDVI GWE, please contact us.
  • Manages up to 10 ENGAGE enabled devices for a wide range of applications
  • Secure AES-256 bit encrypted 2.4 GHz Bluetooth 4.0 communication between Gateway and ENGAGE

1 Review

  • 5
    CDVI-GWE

    Posted by 144800 on Jul 29th 2019

Live Chat