Securitron EPS-05 EcoPower Power Supply
Also known as: EPS05, SN-EPS05
The Securitron EPS-05 EcoPower power supply is designed to work with low-power electrified access control devices. This small aesthetic power supply reduces standby power consumption to only 8.5mW (0.0085W), a 99% energy savings compared to current linear and switching power supplies. EcoPower can also reduce total door power consumption by 99% from up to 20W to a phenomenal 0.3W, when paired with a lock like EcoFlex from SARGENT and Corbin Russwin. The low power consumption means that the included EcoPower battery provides 24 or more hours of backup power. EcoPower is the most efficient, fully featured power supply available today. If you’re looking for the most efficient power supply on the market to save energy and lower door power consumption, you need the Securitron EcoPower. This aesthetically simple power supply has a host of features, and at 4” by 4” by 3-” and 1.7 lbs it is small enough to be installed in a convenient place near a door lock. It works with low-power electrified locks in either a fail-safe or fail-secure configuration. The EcoPower’s environmental benefits make it an even better value, and are detailed in Securitron’s comprehensive Environmental Product Declaration. It’s reusable, and can be moved from one door to another within its 10 year service life. It has the potential to save up to 99% of the energy other switching power supplies us, and a remarkably low power consumption. With a 115V input, there is only 8.5mW standby power consumption. If you pair it with a ecologically sound lock such as EcoFlex, it can reduce the total door power consumption by about 99%. That means a potential reduction from 20W to an incredible 0.3W. The EcoPower has several certifications from GreenCircle, which assures third party certification of any environmental or sustainability claims. The EcoPower’s current certifications include: Inside the enclosure there are two outputs, one each for the lock and the credential, a battery charger, access control inputs, and a fire alarm input with optional fire alarm latching. The 100 mAH sealed AGM lead acid battery included with the power supply provides up to 26 hours of backup power. The EcoPower uses its battery to supply energy to the electrified lock, and draws energy from the wall to charge that battery less than once a day, only as needed. The EcoPower has universal input capabilities with 100-240VAC voltage. It has 14V output voltage with a 0.5A peak output current, and a 0.1A continuous output current. It has standby power of less than 10mW at 115V, and less than 20mW at 230V. The operating temperature should run between -4 to 122 degrees Fahrenheit, or -20 to 50 degrees Celsius. It also features low current wire runs, reduced wire run length, a fire alarm input and an access control input. The EcoPower features three convenient mounting options for a variety of installation needs. The power supply can be surface mounted, recessed into drywall, or mounted above a drop ceiling. You can even mount it on an existing UL listed double gang junction box if you don't want to install it with the factory box. There are several small screws, and paper instructions included in the box to assist with installation. You can also be assured that Securitron stands behind its products, with a MagnaCare lifetime replacement, no fault warranty. The battery that is included is however not covered under the MagnaCare warranty. Additional patents, approvals and listings include: - UL Certificate of Compliance (CoC)
- UL 294 (6th Edition) listed - Standard for Access Control System Units
- UL 603 Listed - Standard for Power Supplies for Use with Burglar-Alarm Systems
- ULC S533 Listed - Standard for Egress Door Securing and Releasing Devices
- CE Certified
- EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
- EN 55022 Class A (Emissions): 2010
- EN 55024 (Immunity): 2010
- EN61000-3-2: 2014
- EN61000-3-3: 2013
- RoHS Compliant
- REACH Compliant
|
Features:
- Extremely low power consumption, only 8.5mW standby power consumption with a 115V input
- Included battery provides 24 hours of backup
- Universal voltage input capabilities (100-240VAC)
- Aesthetic design allows for convenient installation near the lock
- Multiple mounting options:
- Surface mounted
- Recessed into drywall
- Mounted above a drop ceiling
- Can be installed with the factory box or be mounted on an existing UL listed double gang junction box
- Low current wire runs and reduced wire run length
- Fire alarm input
- Access control input
- One (1) battery included (Not covered under MagnaCare Warrenty)
- MagnaCare lifetime replacement, no fault warranty
|
