Home > GE Security > Access Control > Computers & Peripherals > Exit Devices >

UTC Interlogix (Formerly GE Security/Sentrol) RCR-REX-W Dual Technology Request-to-Exit Motion Sensor, DPDT, Form C, Wall Plate, White
RCR-REXW UTC (Formerly GE Security/Sentrol) | JMAC Supply
 

Our Price: $129.99

Product Code: UTC-GE-SENTROL-RCR-REXW
Qty:

Description Product Resources
 

UTC Interlogix (Formerly GE Security/Sentrol) RCR-REX-W Dual Technology Request-to-Exit Motion Sensor, DPDT, Form C, Wall Plate, White


  • Also known as: RCRREXW, SR-RCRREXW, GES-RCRREXW

  • The UTC Interlogix RCR-REX-W is a dual technology, request-to-exit sensor used for secure door egress and door access control. The sensor combines the power of passive infrared and Doppler rangecontrolled radar technologies to provide the industrys most secure request-to-exit sensor.

    With the RCR-REX-W, dual technology requires that both the units PIR sensor and RCR sensor detect intrusion activity in order to trigger the internal relay. For maximum protection, adjust the radar so that the curtain is above the oor; objects slipped under the door will not activate the sensor, making it virtually impossible to defeat.

    Depending on the settings chosen by the installer, when the RCR-REX-W's sounder is turned on, it produces an audible tone to warn of door-open-too-long (DOTL). Closing the door silences the sounder, while new movement restarts the timer and resets the sounder. A beeping tone will sound at the end of the external input signal if the door is open.
    Features:
    • Color: White
    • Proprietary dual technologyrequest-to-exit uses both RCR and PIR to detect intruders
    • Incorporates two Form C output relay contacts
    • Tamper switch detects device open
    • Includes mask for easy adjustment of PIR eld of view
    • Optional single gang wall plate
    • Swing open design allows easy adjustment
    • Built-in adjustable sounder for door position monitoring
    • Wall or ceiling mount
    • Dual relay outputs


    Technical Specifications:

    • Voltage: 12 to 30VAC/VDC
    • Current: 23mA typical, 28mA max. @ 12VDC; 15mA typical, 17mA max. @ 24VDC; 31mA typical, 38mA max. at 12VAC; 26mA typical, 29mA max. at 24VAC
    • Time Delay: 1/2, 1, 2, 4, 8, 16, 32, 64 sec. at 10%, selectable
    • Loop Type: Open or Closed
    • Max. Loop Rating: 2A @ 30VDC
    • Alarm Output: DPDT (Form C)
    • Tamper Output: 50mA @ 30VDC
    • Wire Gauge: AWG 14 to 22 (18 to 22 recommended)
    • Radar Frequency: 5.8 GHz
    • Range: Depth 3 to 15 ft. (0.9 to 4.57 m) adjustable, Width 7.9 ft. (2.4 m), PIR 15 ft. (4.6 m), adjustable
    • Dimensions (HxWxD): 1.76" x 7.395" x 1.85" (45 mm x 188 mm x 47 mm)
    • Weight: 9.2 oz. (261 g)
    • Housing Material: ABS plastic
    • Color: White
    • Mounting Height 7 to 15 ft. (2.13 to 4.57 m) typical


    UPC: 046188123629

    For more information about the UTC (Formerly GE Security/Sentrol) RCR-REXW, please contact us.

    Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.

      11 of 11 people found the following review helpful:
     
    5 of 5 Review left on 7/26/2013 September 29, 2022
    Reviewer: Roselle Mcmillan from Cammal, PA  
    Purchased the UTC (Formerly GE Security/Sentrol) RCR-REXW

    Was this review helpful to you?

      8 of 8 people found the following review helpful:
     
    5 of 5 Review left on 8/7/2013 September 29, 2022
    Reviewer: Kerri Daniel from Westover, WV  
    Purchased the UTC (Formerly GE Security/Sentrol) RCR-REXW

    Was this review helpful to you?


    Browse for more products in the same category as this item:

    GE Security > Access Control > Computers & Peripherals > Exit Devices
    GE Security
    GE Security > Access Control
    GE Security > Access Control > Computers & Peripherals
    Access Control > Request To Exit Devices > Request to Exit Motion Sensors
    UTC (Formerly GE Security/Sentrol)
    Access Control > Request To Exit Devices