Takex FS1000E Flame Sensor

• Battery (2x AA type-3 alkaline) or DC Operation
• External Output to a Security System
• Variable Response Timer
• Built-in Alarm Sounder
• Compact Design
• Low Battery Warning
• Battery Check Function

• Detection system: Ultraviolet rays detection, (detected wave length 180~260nm)
• Detection distance: 10m (33ft) max. (7cm flame)
• Detection angle: Approx. 120 degrees (conically)
• Detection timer: 3 steps changeover by slide switch, H (0.2 sec), M (1 sec), L (6 sec)
• Power supply: Type-3 alkaline battery (LR6) x2 (3V) - included, Lithium battery (CR17450E-R-2-CM2) x1 (3V) - optional, External power supply 9V to 30VDC with polarity
• Power consumption: Standby: 50A max. (battery) / 5mA (DC), Alarm: 50mA max. when buzzer sounds
• LED (red): LED alarm: blinking every 0.2 sec during off-delay 10 sec, Low battery: light on 0.1 sec every 5 sec.
• Buzzer: Alarm: intermittent every 0.2 sec during off delay 10 sec, Low battery: sound 0.1 sec every 5 sec., Volume: 80dB or more 1m (3.3ft) ahead, (silent setting is available by cutting internal jumper line)
• Wiring: Terminals
• Ambient temperature: -10C to +60C (+14F to +140F) (battery performance may decrease below 0C and above 40C
• Installation: Indoor (ceiling or wall mount)
• Weight: Approx. 200g (7oz)
• Appearance: ABS resin (white)
• Supplied accessories: Battery case (Type-3): 1pc, Type-3 alkaline battery (LR6): 2pcs, Sensor locking screw: 1pc, Tapping screw: 2pcs