 |
 |
 |
|
System Sensor P2R-P Horn Strobe, Red, Wall Mount, Two-Wire, Standard Candela
Also known as: P2RP, BK-P2RP
The SpectrAlert Advance P2R-P is an unmarked, red, two-wire horn strobe with selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd. |
Features:
- Plain or ALERT-printed white housings
- Clear or Amber lens strobes and speaker strobes
- Color lens attachments for use with clear lens wall or ceiling strobes or clear dual strobe expander plates
- Dual Strobe Expander Plates for use with Strobe and Speaker Strobe devices
- Meets DoD specification requirements
- Plug-in design for simplified installation and troubleshooting
- Mounting plate shorting spring easily tests wiring continuity
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- Field-selectable candela settings of 15, 15/75, 30, 75, 95, 110, 115
- Rated from 32F to 120F (indoor devices); 40F to 151F (NEMA 4X, IP56 weatherproof devices)
- Optional tamper-resistant Torx head screw
- Compatible with System Sensor synchronization protocol
|
Technical Specifications:
- Candela: Selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd
- Color: Red
- DC Max Op Current: (see Data Sheet for complete current draw information)
- FWR Max Op Current: (see Data Sheet for complete current draw information)
- Location: Indoor
- Maximum Humidity: 10 to 93% non-condensing
- Mounting: Wall
- Operating Temperature: -40F to 151F (-40C to 66C)
- Operating Voltage Range: 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
- Voltage: Regulated 12DC/FWR or regulated 24DC/FWR
- Wall Mount Dimensions: 5.6"L x 4.7"W x 2.5"D (142 mm L x 119 mm W x 64 mm D)
- Wiring Gauge: 12 to 18 AWG
|
UPC: 783863028847
Average rating: 5.0, based on
2 reviews
For more information about the System Sensor P2R-P, please contact us.
|
|
|
 |
|
 |
|
