|
The BPSM is the perfect product to take your access control power needs to the next level. It combines a high quality power supply that provides clean, efficient power, with a self-monitoring system to help you keep on top of any failures or battery problems. Some fire alarm systems with auxiliary relays just can't manage the full current of the power supply, and this is where the reliability of the BPSM comes in.
If there is an AC failure or DC battery failure, it will be shown by status LED indicators that are simple to interpret and provide an instant visual of the power supply's state. There are also 3 Amp SPDT AC status output terminals that will give you information in real time, and 3 Amp Form "C" battery status output terminals that will tell you the status of the battery. In the event of a fire, there are emergency low-current terminals to release power.
The BPSM has 2 Amp polyswitch PTC output breakers that protect its eight outputs, which let you connect to several different devices. It's easy to connect or disconnect each control circuit from power with its own individual slide switch. It doesn't come with a battery, but if you purchase one separately it has the ability to quickly charge and switch over to the sealed lead acid-gel standby battery in case there is a power failure, and the battery will automatically disconnect if the voltage drops below 10.4 VDC (for 12 VDC models) or 20.8 VDC (for 24 VDC models) to keep it from being drained too deeply and damaging the system.
The input voltage is 120 VAC, and the 12 VDC models come in 6 Amp, 9 Amp and 15 Amp versions. The 24 VDC models come in 4 Amp, 6 Amp, and 10 Amp versions. The unit operates between 32 and 105 degrees Fahrenheit, or 0 to 40 degrees Celsius. All models are 15" wide, 8" high and 6" deep.
There are two safety issues to keep in mind with this unit. The line voltage could create a high voltage shock, and the DC/battery output is a high energy hazard. These could create a situation where the wiring insulation melts and starts a fire. To avoid this, check to see if the cover LED is on and red. If so, that means there is potential for a dangerous situation and any trained service personnel should take caution when opening the unit.
There are several models of the BPSM. The BPSM-12-6, BPSM-12-9, and BPSM-12-15 all have 12 VDC voltage with 6 Amps, 9 Amps, and 15 Amps respectively. The BPSM-24-4, BPSM-24-6 and BPSM-24-10 all have 24 VDC voltage, and 4 Amps, 6 Amps, and 10 Amps respectively. The BPSM-12-6 and BPSM-24-4 ship at 24 lbs. The BPSM-12-9 and BPSM-24-6 ship at 28 lbs. The BPSM-12-15 and BPSM-24-10 ship at 33 lbs.
There are a variety of patents, approvals and listings available for the BPSM that will inform you about the materials and quality behind the products:
|
