Home > IFS International Fiber Systems > IFS Advanced Fiber Optics > Video Products > Fixed Video >

International Fiber Systems IFS VR4010-R3 FM Video Receiver, Multimode, 1 Fiber, 850nm, Rack Mount
VR4010-R3 IFS International Fiber Systems | JMAC Supply
 

Our Price: $471.00


Product Code: IFS-VR4010-R3
Discontinued, Call For Replacement

Description Product Resources Accessories
 

International Fiber Systems IFS VR4010-R3 FM Video Receiver, Multimode, 1 Fiber, 850nm, Rack Mount


UPC: 046188163502
Also known as: VR4010R3, IF-VR4010R3, IFS-VR4010R3


The IFS VT/VR4000 Series Video Transmitter and Receiver utilizes frequency modulation for transmission quality that meets some of the requirements for EIA RS-250C Medium-Haul Video Transmission. These environmentally hardened units provide transmission of NTSC, PAL, or SECAM video over one multimode or single mode fiber optic cable and are ideal for use in unconditioned out-of-plant or roadside installations. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. LED indicators are provided for rapidly ascertaining equipment operating status, and this equipment is available in either stand-alone or rack mount configurations.
Features:
  • Receiver Component
  • Multimode
  • 1 Fiber
  • 850nm Wavelength
  • Rack Mount
  • Frequency Modulation for High Quality Video Transmission
  • Meets Some Requirements for RS-250C Medium-Haul Transmission
  • Directly Compatible with All NTSC, PAL, or SECAM CCTV Camera Systems
  • LED Status Indicators Provide Rapid Indication of Critical Operating Parameters
  • Solid-State Current Limiters on All Power Lines Provide Equipment Protection
  • Wide Optical Dynamic Range: Optical Attenuators are Never Required
  • Optical Loss Relay Output
  • Comprehensive Lifetime Warranty


Technical Specifications:

  • Video Input: 1 volt pk-pk (75 ohms)
  • Bandwidth: 10 Hz - 10 MHz
  • Differential Gain: <2%
  • Differential Phase: <1.3
  • Tilt: <1%
  • Signal-to-Noise Ratio (SNR): <60 Minimum @ Max. Optical Loss Budget
  • Wavelength: 850nm, Multimode
  • Receiver Sensitivity: .5 w (-33 dBm)
  • Number Of Fibers: 1
  • Led Indicators: Optical Carrier Detect, Operating Power
  • Relays: 24 VAC/DC @ 100 mA
  • Connectors: Optical: ST; Power: Terminal Block with Screw Clamps; Video: BNC (Gold Plated Center-Pin)
  • Power: Surface Mount: 24 VAC C.T. @ 300 mA; Rack: From Rack
  • Number of Rack Slots: 1
  • Current Protection Automatic Resettable Solid-state Current Limiters
  • Circuit Board: Meets IPC Standard
  • Size (in./cm.) (LxWxH): Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.4 x 2.5 cm; Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm
  • Shipping Weight: < 2 lbs./0.9 kg
  • MTBF: > 100,000 hours
  • Operating Temp: -40 C to +74 C
  • Storage Temp: -40 C to +85 C
  • Relative Humidity: 0% to 95% (non-condensing)

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.

  4 of 4 people found the following review helpful:
 
5 of 5 Review left on 4/1/2013
Reviewer: Sydney Justice from Napoleon, ND  
Purchased the IFS International Fiber Systems VR4010-R3

Was this review helpful to you?

  10 of 10 people found the following review helpful:
 
5 of 5 Review left on 8/4/2013
Reviewer: Thomasine Powell from Brownstown, IL  
Purchased the IFS International Fiber Systems VR4010-R3

Was this review helpful to you?


Browse for more products in the same category as this item:

IFS International Fiber Systems > IFS Advanced Fiber Optics > Video Products > Fixed Video
IFS International Fiber Systems
IFS International Fiber Systems > IFS Advanced Fiber Optics
IFS International Fiber Systems > IFS Advanced Fiber Optics > Video Products
Signal Transmission & Distribution > Fiber Transmission
Signal Transmission & Distribution