 |
 |
 |
|
International Fiber Systems IFS VDR1505WDM-R3 Digital Video Receiver/Data Transmitter, Multimode, 1 Fiber, 1550/1310nm, Rack Mount
Also known as: VDR1505WDMR3, IF-VDR15WMR3, GES-VDR1505WDMR3
DIGITAL VIDEO RX/DATA TX, UP-THE-COAX, 1 FIBER, RM
The IFS VDT/VDR1505 series video and data transmission system is designed for full compatibility with 'Up-the-Coax' video/data systems from major manufactures such as Panasonic Proteus, Pelco Coaxitron, Bosch Bi-Linx, and others. The module supports simultaneous broadcast quality transmission of 10-bit digitally encoded video and '"up the coax" data over one multimode or singlemode fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The VDT/VDR1505 series features an optional contact closure input that allows an additional device such as a dome tamper switch or alarm input to be added and its signal transmitted back to the monitoring location. This feature eliminates the need for installing additional wiring to support the alarm contact closure. The modules incorporate power, video and data status indicating LED's to monitor proper system operation. The modules are available in either stand-alone or rack mount versions. |
Features:
- Digital Video Receiver/Data Transmitter
- Multimode
- 1 Fiber
- 1550/1310nm Wavelength
- Rack Mount
- Transmission of Video and Up-the-Coax One-Way Data
- 10-Bit Digitally Encoded Video Transmission
- Exceeds RS-250C Short-Haul Transmission
- Optional Bi-Directional Contact Closure
- NTSC, PAL, SECAM Compatible
- Full Color Compatibility
- No In-eld Electrical or Optical Adjustments Required
- Power, Video and PTZ Data Status Indicating LEDs to Monitor System Performance
- Integrated WDM for Greater Product Reliability
- Hot-Swappable Rack Modules
- Automatic Resettable Fuses on all Power Lines
- Distances up to 15 miles (25 km)
- Comprehensive Lifetime Warranty
|
Technical Specifications:
- Video Input/Output: 1 volt pk-pk (75 ohms)
- Bandwidth: 5 Hz - 10 MHz
- Differential Gain: <1%
- Differential Phase: <0.7
- Tilt: <1%
- Signal-to-Noise Ratio (SNR): >67 dB @ Maximum Optical Loss Budget
- Data Interface: Pelco Coaxitron, Panasonic Proteus, Bosch Bi-Linx
- Wavelength: 1550/1310 nm, Multimode
- Number Of Fibers: 1
- Connectors: Optical: ST; Power and Data: Terminal Block with Screw Clamps; Video and Sync: BNC (Gold Plated Center-Pin)
- Power: 12 VDC @ 250 mA
- Number of Rack Slots: 1
- Current Protection: Automatic Resettable Solid-State Current Limiters
- Circuit Board: Meets IPC Standard
- Size (in./cm.) (LxWxH): Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm; Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm
- Shipping Weight: < 2 lbs./0.9 kg
- MTBF: > 100,000 hours
- Operating Temp: -40 C to +74 C
- Storage Temp: -40 C to +85 C
- Relative Humidity: 0% to 95% (non-condensing)
|
UPC: 807385111945
Average rating: 5.0, based on
2 reviews
For more information about the IFS International Fiber Systems VDR1505WDM-R3, please contact us.
Related Products:
International Fiber Systems IFS VDR1505WDM Digital Video Receiver/Data Transmitter, Multimode, 1 Fiber, 1550/1310nm
International Fiber Systems IFS VDR1535WDM Digital Video Receiver/Data Transmitter, Single Mode, 1 Fiber, 1550/1310nm
International Fiber Systems IFS VDR1535WDM-R3 Digital Video Receiver/Data Transmitter, Single Mode, 1 Fiber, 1550/1310nm, Rack Mount
International Fiber Systems IFS VDT1505WDM Digital Video Transmitter/Data Receiver, Multimode, 1 Fiber, 1310/1550nm
International Fiber Systems-R3 IFS VDT1505WDM Digital Video Transmitter/Data Receiver, Multimode, 1 Fiber, 1310/1550nm, Rack Mount
International Fiber Systems IFS VDT1535WDM Digital Video Transmitter/Data Receiver, Single Mode, 1 Fiber, 1310/1550nm
|
|
|
 |
|
 |
|
