Home > IFS International Fiber Systems > IFS Advanced Fiber Optics > Ethernet Products >

International Fiber Systems IFS D7120-R3 10/100 Ethernet Transreceiver, Multimode Laser, 2 Fibers, 1310nm, Rack Mount
D7120-R3 IFS International Fiber Systems | JMAC Supply
 

Our Price: $485.92


Product Code: IFS-D7120-R3
Discontinued, Call For Replacement

Description Product Resources
 

International Fiber Systems IFS D7120-R3 10/100 Ethernet Transreceiver, Multimode Laser, 2 Fibers, 1310nm, Rack Mount


UPC: 807385101212
Also known as: D7120R3, IF-D7120R3, IFS-D7120R3


The IFS D7100 Series ethernet transceiver is designed to transmit and receive 10 or 100 Mbps data over multimode or single mode fiber. The IFS D7100 Series will function as a 10 Mbps Ethernet link, or as a 100 Mbps Ethernet link without any adjustments. The D7100 Series is environmentally hardened to operate in extreme temperatures. Status indicating LEDs for power and data type are present at the RJ-45 connector and at the fiber optic transceiver end. Plug-and-Play design ensures ease of installation requiring no electrical or optical adjustments. The modules are available in either stand-alone or rack mount versions.
Features:
  • Multimode Laser
  • 2 Fibers
  • 1310nm Wavelength
  • Rack Mount
  • 10/100 Mbps Ethernet
  • Auto Network Detection MDI/MDI-X
  • Distances up to 45 km (28 miles)
  • NTCIP Compatible
  • Multimode and Single Mode Versions Available
  • ST Optical Connectors Standard
  • No In-field Electrical or Optical Adjustments Required
  • Power, Transmit and Receive Data Status LED Indicators
  • Hot-Swappable Rack Modules
  • IEEE 802.3 Compliant
  • Comprehensive Lifetime Warranty


Technical Specifications:

  • Data Interface: Ethernet
  • Data Rate: 10/100 Mbps, IEEE 802.3 Compliant, Full Duplex or Half Duplex
  • Wavelength: 1310 nm, Multimode
  • Number Of Fibers: 2
  • Connectors: Optical: ST; Power: Terminal Block with Screw Clamps; Data: RJ-45
  • Power: Surface Mount: 12 VDC @ 200 mA, Rack: From Rack
  • Number of Rack Slots: 2
  • Voltage Regulation: Solid-state; independent on each board
  • Current Protection: Automatic Resettable Solid-State Current Limiters
  • Circuit Board: Meets IPC Standard
  • Size (in./cm.) (LxWxH): Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm; Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5 cm
  • Shipping Weight: < 2 lbs./0.9 kg
  • MTBF: > 100,000 hours
  • Operating Temp: -40 C to +74 C
  • Storage Temp: -40 C to +85 C
  • Relative Humidity: 0% to 95% (non-condensing)

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.

  4 of 4 people found the following review helpful:
 
5 of 5 Review left on 3/23/2013
Reviewer: Anita Lambert from Hueys Corners, KY  
Purchased the IFS International Fiber Systems D7120-R3

Was this review helpful to you?

  7 of 7 people found the following review helpful:
 
5 of 5 Review left on 4/16/2013
Reviewer: Susanna Scott from Smelterville, ID  
Purchased the IFS International Fiber Systems D7120-R3

Was this review helpful to you?


Browse for more products in the same category as this item:

IFS International Fiber Systems > IFS Advanced Fiber Optics > Ethernet Products
IFS International Fiber Systems
IFS International Fiber Systems > IFS Advanced Fiber Optics
Signal Transmission & Distribution > Fiber Transmission
Signal Transmission & Distribution