Home > IFS International Fiber Systems > IFS Advanced Fiber Optics > Data Products > RS-232/422 Interface >

International Fiber Systems IFS D1030 RS232/RS422 Data Transreceiver, Single Mode, 2 Fibers, 1310nm
D1030 IFS International Fiber Systems | JMAC Supply
 

Our Price: $682.00


Product Code: IFS-D1030
Qty:

Description Product Resources
 

International Fiber Systems IFS D1030 RS232/RS422 Data Transreceiver, Single Mode, 2 Fibers, 1310nm


  • Also known as: IF-D1030, IFS-D1030

  • The IFS D1000 Series data transceivers provide point-to-point transmission of simplex or duplex EIA 22 data signals over one or two optical fibers. The transceivers are transparent to data encoding allowing for broad-range compatibility. The transceivers are also compatible with the IFS D2100 Series drop and repeat data transceivers when used as line terminating devices. Models within this series are available for use with multimode or single mode optical fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates power and transmit/receive data status indicating LEDs for monitoring proper system operation. The modules are available either stand-alone or rack mount versions.
    Features:
    • Single Mode
    • 2 Fibers
    • 1310nm Wavelength
    • Meets EIA RS-232/422 Specifications (Simplex or Duplex)
    • Point-to-Point Topology
    • Transparent to Data Encoding / Compatible w/Major Data Protocols
    • Data Rates up to 1.5 Mbps
    • No In-field Electrical or Optical Adjustments Required
    • Power, Transmit and Receive Data Status LED Indicators
    • NTCIP Compatible
    • Integrated WDM for Greater Product Reliability
    • Automatic Resettable Solid-State Current Limiters
    • Hot-Swappable Rack Modules
    • Distances up to 37 Miles (60 km)
    • Comprehensive Lifetime Warranty


    Technical Specifications:

    • Data Interface: RS-232 (data lines only), or RS-422 (see note)
    • Data Rate: DC - 1.5 Mbps (NRZ)
    • Operating Mode: Asynchronous Simplex or Full-Duplex
    • Bit Error Rate: <1 in 10
    • Wavelength: 1310 nm, SM
    • Number Of Fibers: 2
    • Optical Connectors: ST
    • Data and Power Connectors: Terminal Block with Screw Clamps
    • Power Surface Mount: 12 VAC @ 150 mA
    • Rack: From Rack
    • Number of Rack Slots: 1
    • Current Protection: Automatic Resettable Solid-State Current Limiters
    • Circuit Board: Meets IPC Standard
    • Size (in./cm.) (LxWxH): Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
    • Shipping Weight: < 2 lbs./0.9 kg
    • MTBF: > 100,000 hours
    • Operating Temp: -40 C to +74 C*
    • Storage Temp: -40 C to +85 C*
    • Relative Humidity: 0% to 95% (non-condensing)


    UPC: 807385105616

    For more information about the IFS International Fiber Systems D1030, please contact us.

    Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.

      5 of 5 people found the following review helpful:
     
    5 of 5 Review left on 7/20/2013 September 29, 2022
    Reviewer: Annelle Schroeder from Luning, NV  
    Purchased the IFS International Fiber Systems D1030

    Was this review helpful to you?

      2 of 2 people found the following review helpful:
     
    5 of 5 Review left on 7/8/2013 September 29, 2022
    Reviewer: Lanora Brooks from Bozar, TX  
    Purchased the IFS International Fiber Systems D1030

    Was this review helpful to you?


    Browse for more products in the same category as this item:

    IFS International Fiber Systems > IFS Advanced Fiber Optics > Data Products > RS-232/422 Interface
    IFS International Fiber Systems
    IFS International Fiber Systems > IFS Advanced Fiber Optics
    IFS International Fiber Systems > IFS Advanced Fiber Optics > Data Products