EnerSys NP5-12T Genesis NP Series 12V 5Ah SLA Battery
EnerSys 12V 5 Ah Sealed Lead-Acid Battery
EnerSys NP5-12T is a 12 Volt 5 Amp Rechargeable, Non-Spillable, VRLA Sealed Lead-Acid Battery. The NP5-12T is ideal for Burglar Alarm and Fire Alarm Systems, as well as Access Control Systems as a back up battery to ensure operational integrity. The NP5-12T can also be used in applications wherever a 12V 5Ah Sealed LEad Acid battery is required.
The NP5-12T uses F2 terminals which measure .250" and fit into many standard panels. While some UPS systems use 12 Volt 5 Amp Hour SLA batteries, they very often require the larger F2 terminals which measure .250". As always, we encourage you to contact JMAC Supply if you have any questions regarding SLA battery selection or compatibility.
Some of the features of the Enersys NP5-12T SLA battery include:
Enersys' unique construction and sealing technique ensures no electrolyte leakage from case or terminals.
Electrolyte Suspension System
All NP batteries utilize EnerSys's unique electrolyte suspension system incorporating a microfine glass mat to retain the maximum amount of electrolyte in the cells. The electrolyte is retained in the separator material and there is no free electrolyte to escape from the cells. No gels or other contaminants are added.
Control of Gas Generation
The design of EnerSys's NP batteries incorporates the very latest oxygen recombination technology to effectively control the generation of gas during normal use.
Low Maintenance Operation
Due to the perfectly sealed construction and the recombination of gasses within the cell, the battery is almost maintenance free.
NP batteries are manufactured using a range of terminals which vary in size and type.
Operation in any Orientation
The combination of sealed construction and Enersys' unique electrolyte suspension system allows operation in any orientation, with no loss of performance or fear of electrolyte leakage.
Valve Regulated Design
The batteries are equipped with a simple, safe, low pressure venting system which releases excess gas and automatically reseals should there be a build up of gas within the battery due to severe overcharge.
Lead Calcium Grids
The heavy duty lead calcium alloy grids provide an extra margin of performance and life in both cyclic and float applications and give unparalleled recovery from deep discharge.
Long Cycle Service Life
Depending upon the average depth of discharge, over a thousand discharge/charge cycles can be expected.
Float Service Life
The expected service life is five years in float standby applications.
The use of the special separator material provides a very efficient insulation between plates preventing inter-plate short circuits and prohibiting the shedding of active materials.