Shop by Brand

  Home > Shop by Brand > Enersys Power Solutions >

Enersys NP1.2-6 6V 1.2Ah Sealed Lead Acid Battery

NP1.2-6 EnerSys | JMAC Supply
 
In Stock
Our Price: $15.75


Product Code: ENERSYS-NP1.2-6
Qty:

Description Product Resources Accessories
 

Enersys NP1.2-6 6V 1.2Ah Sealed Lead Acid Battery

EnerSys NP1.2-6 is a 6 Volt 1.2 Ah Rechargeable, Non-Spillable, VRLA Sealed Lead-Acid Battery with F1 terminals.

Sealed Construction
The Enersys NP1.2-6 is uniquely constructed and sealed to prevent electrolyte leakage from case or terminals.

Electrolyte Suspension System
The battery utilizes a state-of-the-art electrolyte suspension system incorporating a microfine glass mat to retain the maximum amount of electrolyte in the cells. The electrolyte is retained in the separator material and there is no free electrolyte to escape from the cells. No gels or other contaminants are added.

Control of Gas Generation
The design of the EnerSys NP1.2-6 battery incorporates the very latest oxygen recombination technology to effectively control the generation of gas during normal use.

Low Maintenance Operation
Due to a perfectly sealed construction and the recombination of gases within the cell, the battery is virtually maintenance free.

Terminals
The NP1.2-6 is equipped with .187" F1 terminals.

Operation in any Orientation
The combination of sealed construction and Enersys' unique electrolyte suspension system allows operation in any orientation, with no loss of performance or fear of electrolyte leakage.

Valve Regulated Design
The batteries are built with a simple, safe, low pressure venting system which releases excess gas and automatically reseals should there be a build up of gas within the battery due to severe overcharge.

Lead Calcium Grids
The heavy duty lead calcium alloy grids provide an extra margin of performance and life in both cyclic and float applications.

Long Cycle Service Life
Depending upon the average depth of discharge, over a thousand discharge/charge cycles can be expected.

Float Service Life
The expected service life is five years in float standby applications.

Separators
The use of the special separator material provides a very efficient insulation between plates preventing inter-plate short circuits and prohibiting the shedding of active materials.

All batteries purchased from JMAC Supply are individually tested prior to shipment to ensure optimal performance and maximum battery life. If you have any questions or need any assistance in selecting the correct battery for your application please feel free to contact us at (516) 812-0917 and a member of our team will be happy to assist you.

Features:
  • 6 Volt, 1.2Ah Sealed Lead Acid Battery
  • F1 Faston Terminals (.187")
  • Long service life (can last over 1,000 charge/discharge cycles)
  • Low maintenance
  • Non-spillable
  • Leak proof construction
  • Rechargeable
  • Capable of recovering from deep discharge
  • Electrolyte Suspension System


Technical Specifications:

  • Nominal Capacity 20hr: 1.2
  • Voltage: 6
  • Dimensions: Length 3.82" (97mm) x Width 0.98" (25mm) x Height 2.20" (56mm)
  • Weight: 0.30 Kg (0.67 lbs)
  • Terminal: A
  • Layout: 1

Average Customer Review: 5 of 5 Total Reviews: 2 Write a review.

  10 of 10 people found the following review helpful:
 
Review left on 6/15/2013
Reviewer: Georgeann Newton from Pandale, TX  
Purchased the EnerSys NP1.2-6

Was this review helpful to you?

  7 of 7 people found the following review helpful:
 
Review left on 4/23/2013
Reviewer: Buford Yang from Gore, VA  
Purchased the EnerSys NP1.2-6

Was this review helpful to you?


Browse for more products in the same category as this item:

Shop by Brand > Enersys Power Solutions
Batteries > Sealed Lead Acid Batteries
Batteries > Alarm Batteries > 6 Volt Alarm Batteries
Shop by Brand
Batteries
Batteries > Alarm Batteries