Home > Batteries > Sealed Lead Acid Batteries >

EnerSys NP1.2-12 12V 1.2 Ah Sealed Lead Acid Battery
NP1.2-12 EnerSys | JMAC Supply
 

Our Price: $13.39



Product Code: ENERSYS-NP1.2-12
Qty:

Description Product Resources Accessories
 

EnerSys NP1.2-12 12V 1.2 Ah Sealed Lead Acid Battery


  • Also known as: NP1212

  • The EnerSys NP1.2-12 is a 12 Volt 1.2 Ah Sealed Rechargeable, Non- Spillable VRLA Sealed Lead-Acid Battery

    PLEASE NOTE this is not a 12Ah battery, this battery is of a smaller 1.2Ah capacity. Please contact us for assistance selecting the correct battery.

    All batteries purchased from JMAC Supply are individually tested prior to shipment to ensure optimal performance and maximum battery life. If you have any questions or need any assistance in selecting the correct battery for your application please feel free to contact us at (516) 812-0917 and a member of our team will be happy to assist you.

    Sealed Construction
    Enersys' unique construction and sealing technique ensures no electrolyte leakage from case or terminals.

    Electrolyte Suspension System
    All NP batteries utilize EnerSys's unique electrolyte suspension system incorporating a microfine glass mat to retain the maximum amount of electrolyte in the cells. The electrolyte is retained in the separator material and there is no free electrolyte to escape from the cells. No gels or other contaminants are added.

    Control of Gas Generation
    The design of EnerSys's NP batteries incorporates the very latest oxygen recombination technology to effectively control the generation of gas during normal use.

    Low Maintenance Operation
    Due to the perfectly sealed construction and the recombination of gasses within the cell, the battery is almost maintenance free.

    Terminals
    NP batteries are manufactured using a range of terminals which vary in size and type.

    Operation in any Orientation
    The combination of sealed construction and Enersys' unique electrolyte suspension system allows operation in any orientation, with no loss of performance or fear of electrolyte leakage.

    Valve Regulated Design
    The batteries are equipped with a simple, safe, low pressure venting system which releases excess gas and automatically reseals should there be a build up of gas within the battery due to severe overcharge.

    Lead Calcium Grids
    The heavy duty lead calcium alloy grids provide an extra margin of performance and life in both cyclic and float applications and give unparalleled recovery from deep discharge.

    Long Cycle Service Life
    Depending upon the average depth of discharge, over a thousand discharge/charge cycles can be expected.

    Float Service Life
    The expected service life is five years in float standby applications.

    Separators
    The use of the special separator material provides a very efficient insulation between plates preventing inter-plate short circuits and prohibiting the shedding of active materials.
    Features:
    • 12 Volt, 1.2 Ah Sealed Lead Acid Battery
    • Rechargeable
    • Non-Spillable
    • Electrolyte Suspension System
    • Excellent Recovery from a Deep Discharge
    • Maintenance Free


    Technical Specifications:

    • Nominal Capacity: 1.2 AH
    • Length: 3.82" (97mm)
    • Width: 1.89" (48mm)
    • Overall Height (including Terminals): 2.15" (54.5mm)
    • Weight: 1.25 pounds (0.57 kgs)
    • Layout: 3
    • Terminals: A


    UPC: 048493121284

    Average rating: 5.0, based on 2 reviews


    For more information about the EnerSys NP1.2-12, please contact us.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Batteries > Sealed Lead Acid Batteries
    Batteries > Alarm Batteries > 12 Volt Alarm Batteries
    Batteries
    Batteries > Alarm Batteries