Edwards Signaling 869STRB-AQ Electronic Horn/Strobe Alarms & IndicationIndoor Flush Mount Electronic Horn/Strobe, Blue, 24VDC, 0.02A; 24VAC 50/60Hz, 0.06A 5-1/2" Width x 5/8" Depth x 5-1/2" Height, Thermoplastic
Also known as: 869STRBAQ, ED-869STRBAQ
Edwards Signaling 869STRB-AQ Bright, low current, high decibel, surface mount, combination electronic horn/strobes for indoor, flush mount use. Strobe and horn may be operated independently.
Bright, low current, high decibel Edwards 860 Series xenon beacons with horns are combination signals made for use in situations where a recognizable visual or aural signal is required. Engineered thermoplastic in the color gray makes up the housing. Both the strobe and the horn have independent controls.
Surface mounting is possible for the 867STR (indoor) and 868STR (outdoor) Series on the included surface box. The beacons from the 869STR and 869DSTR Series can be flush installed. They are made to fit inside a typical 4" (102mm) square electrical box with an extension ring (total minimum depth of 3" (75mm) is not included).
Diode Polarized for use in electrically supervised circuits, the 869DSTR Series. |
Features:
- Xenon strobe light source with horn
- Flash rate 60 fpm
- 100 dB at 1 meter/90 dB at 10 ft (measured in anechoic chamber)
- Low current draw
- Terminals for easy wiring
- Gray, engineered thermoplastic housing
- Diode Polarized for use in electrically supervised circuits (869DSTR)
- Versions suitable for indoor and outdoor applications
- Operating indoor temperature range: 85% relative humidity at 85F (30C), 32F to 120F (0 to 49C) variable ambient temperature
- Operating outdoor temperature range: 95% relative humidity at 86F (30C), -31F to 150F (-35C to 66C) variable ambient temperature
|
